Recommended Replacement RV Roof Vent Lid For A Fan-Tastic Vent RV Roof Vent

Question

Question:

Is the Replacement Dome for Fan-Tastic Vent RV Roof Vents - Tinted Item # FVK1020-19 a replacement for my Airstream 2023 Flying Cloud 25foot FBQ? The black clips on the new lid cracked. Is there an option other than the black plastic clips, as these break easily. Thank you,

asked by: Ronnie B

0

Expert Reply:

I confirmed with Dometic in the past that they only carry two styles of lids for the Fan-Tastic Vent line; flat or dome. From there you can then just choose your preferred color. If you have a Fan-Tastic Vent RV roof vent then you'll just need to determine if you had flat or dome styled lid to choose the correct replacement.

For a dome style you could use the Replacement Dome for Fan-Tastic Vent RV Roof Vents # FVK1020-19 you referenced or part # FVK1020-81 if you'd prefer white. If you had a flat lid you could use part # DMC66FR.

Unfortunately, most RV roof vent lids are typically a cheap plastic design that can easily be broken so I recommend getting a cover like the MaxxAir II RV and Trailer Roof Vent Cover # MA86JR (white # MA76JR) to install over your vent to protect the lid and allow you to use the vent during inclement weather or while driving. These covers will come with mounting brackets you can install on your vent and then easily clip the cover in place.

expert reply by: Kevin C

0

Answer 1

RV roof vent covers throughout the industry max out at 10-1/4" tall so you'd be limited to this height. Manufacturers know that this won't allow for the vent lid to fully open but have stated that as long as the lid is opened at least…

view full answer...

Answer 2

Thank you for the photos! From what I'm seeing it looks like you need the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents #BV0554-01 which has a continuous hinge and then the Replacement Dome for Fan-Tastic Vent RV Roof Vents…

view full answer...

Answer 3

Since your RV has Maxxair roof vents already the vent cover you'd want is the part #MA86JR which was designed for this application. It won't allow the lid to fully open but once it reaches the top of the vent it won't continue to try and…

view full answer...

Answer 4

MaxxAir and Fan-Tastic Vent Fans are two different brands so you'd be better off with a cover like the Dometic FanTastic Ultra Breeze Trailer Roof Vent Cover #FVU1500BL or #FVU1500WH (white). The MaxxAir II RV and Trailer Roof Vent Cover w/…

view full answer...

Answer 5

Since your vent cover goes up higher than the MaxxAir II RV and Enclosed Trailer Roof Vent Cover #MA86JR and you mention the motor on your fan, you most likely need to replace the cover with the MaxxAir FanMate Rain Cover - Smoke #MA00-955003 so you…

view full answer...

Answer 6

The MaxxAir FanMate Rain Cover in Black #MA00-955002, smoke #MA00-955003, or white #MA00-955001 are confirmed to fit the rounded factory mounting points like you see on the attached photo. If you have the flat mounting anchor points like in the other…

view full answer...

Answer 7

Based on the picture you provided it looks you your hinge only has two points of contact. Since we do not have a 2-point hinge replacement I recommend using the Replacement Lid for Jensen, Ventline, Elixir, and Ventadome RV Roof Vents #A10-3375 as it…

view full answer...

Answer 8

Hey Linda, Yep, it sure will; the WeatherTech Roll Up SunShade Kit #WT87QV will indeed fit your 2024 Nexus Viper 27V. This is a good choice as it is double-sided with one reflective side to keep the sun (and heat!) out of your motorhome, with the…

view full answer...

Answer 9

Hey Dave, the wiring that comes with the etrailer RV Solar Panel Kit part #e59FV is 7.5 meters long. I attached a diagram that shows how multiple panels attach to the controller. This is compatible with lithium batteries too. Is this first time with…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 12

Hi there Mike! Yes, you can technically replace the Coleman Max Q AC in your 2024 Alliance 26RD with a MaxxFan, but there are a few things to keep in mind. The MaxxFan part #MA00-04500K will fit in the same 14" x 14" roof opening, which is…

view full answer...

Recommended Replacement RV Roof Vent Lid For A Fan-Tastic Vent RV Roof Vent

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching