B and W Tow N Stow Adjustable Ball Mount that Fits 2021 GMC Sierra 1500

Question

Question:

Is this compatible with a 2021 GMC Sierra 1500?

asked by: Brian O

0

Expert Reply:

Yes the B&W Tow & Stow 2-Ball Mount # BWTS10037B would fit the 2 inch hitch of your 2021 GMC Sierra 1500. Now if you had the GM MultiPro tailgate you'd instead want the part # BW44FR which was designed for clearing that.

expert reply by: Jameson C

0

Answer 1

By 6-1/2 inch, I'm assuming you're speaking of the drop, correct? You will want to choose a ball mount that has enough drop so that you can tow your trailer so it's level. To determine the necessary drop (or rise) you'll need to find…

view full answer...

Answer 2

The B&W Tow & Stow 2-Ball Mount #BWTS10037B that you referenced will hang down exactly 5-1/2 inches from the bottom of your hitch opening.

view full answer...

Answer 3

The B&W Tow & Stow 2-Ball Mount part #BWTS10037B will measure 9.5" from the top of the shank to the bottom of the hitch ball while in the lowest settings.

view full answer...

Answer 4

In regards to the B&W Tow & Stow 3-Ball Mount part #BWTS10048B for 5" or part #BWTS10049B for 7", the distance from the top of the shank to the bottom of the upright while the hitch balls are stowed away is 8.5" for the 5"…

view full answer...

Answer 5

I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver…

view full answer...

Answer 6

The total height of the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise #BWTS10037B in the rise position is 9-1/2 inches from the center of the shank's pinhole to the top of the ball (in the highest position).…

view full answer...

Answer 7

I spoke with B&W and they said that the only function on the new MultiPro Tailgate that cannot be used with The B&W Tow & Stow #BWTS10037B is the step function. You will still be able to use the other functions of the tailgate without…

view full answer...

Answer 8

The Du-Ha Truck Storage Box and Gun Case #DU34FR that you referenced was designed to fit your 2020 Chevy Silverado 2500 crew cab's floor setup and we've found that these do an excellent job fitting trucks and staying in place. This would be a…

view full answer...

Answer 9

B&W recommends using a pin in their Tow & Stow 3-Ball Mount with 5 Inch Drop #BWTS10048C that is rated at 10,000 lbs. The only locking hitch pins that we carry that specify they are rated for 10,000 lbs and will fit the span of the Tow and…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

B and W Tow N Stow Adjustable Ball Mount that Fits 2021 GMC Sierra 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching