Replacement Shank, Head and Hitch Ball for Equal-i-zer Weight Distribution System # EQ37100ET
Question:
We are looking to purchase the Shank and ball assembly for the following hitch. Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW We have the bars and brackets. Is this available or will we need to buy the complete kit?
asked by: Doug M
Expert Reply:
For your Equal-i-zer Weight Distribution System # EQ37100ET, you can use the Equal-i-zer Weight Distribution Shank # EQ90-02-4100, which has a maximum rise of 7 inches and a maximum drop of 3 inches. For the system head, you will use the Equal-i-zer Replacement Head # EQ90-02-1000. This is designed specifically for the 1,000 pound tongue weight system you have and for the compatible 2-5/16 inch hitch ball you will use # EQ91-00-6100.
I have attached a few short video demonstrations on these products that you can also check out.
Products Referenced in This Question
Replacement Head for Equal-i-zer Weight Distribution Systems - 1,000 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Head
- Square Bar
- Equal-i-zer
- Equal-i-zer
more information >
Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 700 lbs TW
- 800 lbs TW
- 900 lbs TW
- 1000 lbs TW
- 1200 lbs TW
- 1300 lbs TW
- Fits 2 Inch Hitch
- Equal-i-zer
- Square - 3 Inch Drop
- Square - 7 Inch Rise
- Equal-i-zer
more information >
2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems - 10,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- Equal-i-zer
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 800 lbs
- 900 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Can Hydraulic Surge Brake Actuator be Locked Out for Electric Brake Conversion
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Recommendation for Fighting Sag When Towing with a 2010 Toyota Tundra and Weight Distribution
- Q&A: Recommended Weight Distribution Hitch System For a 6,000LB Sailboat Trailer With a Straight Tongue
- Article: Determining Trailer Tongue Weight
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Weight Distribution Hitch For Boat Trailer With Pole Tongue
- Q&A: How to Choose the Correct Weight Distribution Hitch Rating When Looking for a Trailer
- Article: Converting Your RV Water Heater to Tankless
- Q&A: Can you Back Up With the Weigh Safe Weight Distribution Hitch Before Making the Adjustments?
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Q&A: Will B&W Continuum Weight Distribution System Work with Center Frame Piece on Trailer Tongue