Replacement Vinyl Cover for Truxedo TruXport Roll Up Tonneau Cover Part # TX245801

Question

Question:

Are replacement covers available for this model cover? Mine has developed a few holes.

asked by: Rick

0

Expert Reply:

We do indeed offer a replacement cover, the part number is TX245801-CVR. This is the replacement vinyl cover only, you'll need to reuse the old frame and hardware.

expert reply by: Mike L

0

Answer 1

There will be 6 silver clamps that secure your TruXedo TruXport soft tonneau cover to your 2017 Chevy. Simply remove these clamps with a 1/2" socket wrench and your tonneau cover will come right off. I have attached an installation video of the…

view full answer...

Answer 2

The TruXedo TruXport tonneau cover #TX246601 does not have the same latching mechanism at the front of the truck bed as it does at the rear. The fabric is integrated into the front header and you would not be able to easily remove it. I have linked a…

view full answer...

Answer 3

Brian, for Michigan winters you’re right at the edge of what the ethanol-based Prime Guard #PG56ZR is built for. It gives you –50°F burst protection, which is plenty for typical storage, but if you see long subzero stretches, I’d bump up to the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Replacement Vinyl Cover for Truxedo TruXport Roll Up Tonneau Cover Part # TX245801

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching