What is the Outer Diameter of Trailer Hub and Drum Assembly for Hydraulic Brakes 8-271-7UC3
Updated 08/27/2014 | Published 08/26/2014
Question:
What is the outside diameter of the drum?
asked by: Doug O
0
Expert Reply:
The outer diameter of hub and drum assembly # 8-271-7UC3 is approximately 8 inches (7-15/16 on the one I measured) but the only reason I can think of that you would need that information is to make sure it fits a certain wheel size. This particular hub/drum fits 10 to 13 inch trailer wheels.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for Hydraulic Brakes - 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: What Hubs and Electric Brakes do I Need for My 1995 Casita Trailer?
- Q&A: Hub and Drums for a 1995 Casita Trailer
- Q&A: Uni-Servo Hydraulic Trailer Brakes For 7 Inch Drums
- Q&A: Replacement for UFP HD1377 Trailer Hub/Drum
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Raise Your Travel Trailer Height
- Q&A: Raising Trailer Suspension To Clear Rear Leaf Spring From Hitting The Crossmember
- Q&A: Replacement Nylon Bushings And Wet Bolts For Leaf Springs On A 2000 Pequea 1018 Deckover Trailer
- Q&A: Is There An Axle Flip Kit for a 2,000 Lb 1-3/4 Inch Diameter Axle
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision