bing tracking image
Q & A Icon

Can the Demco Battery Disconnect Switch Be Used on the Negative Terminal of a 2024 GMC Canyon AT4?  

Updated 11/16/2026 | Published 11/15/2026

Question:

Hello, I recently purchased the Demco Battery Disconnect Switch Kit 6338 for my 2024 GMC Canyon AT4, which I flat tow behind my motorhome. GMC requires the batterys negative cable to be disconnected during flat towing, but the Demco instructions show installation on the positive side. I currently have two accessories connected directly to the battery: A dedicated 12V power outlet running from the positive battery post into the cab to power my Brake Buddy supplemental braking system. Its negative wire connects directly to the negative battery post. An RV battery charge line running from the positive battery post, through a circuit breaker, to the front 6-pin towing connector. The connector has a chassis ground shared with the diode lighting system. My questions are: Can the Demco 6338 be safely installed on the negative side of my Canyon instead of the positive side? Is the single cable included in the kit sufficient, or will I need additional cables or adapters? Will disconnecting the battery interfere with my Brake Buddy power supply or the RV charge line? If this kit is not compatible, which battery disconnect system would you recommend for my setup? I want to ensure the trucks electrical system is properly disconnected while keeping the Brake Buddy operational and the battery charging during flat towing. Thank you for your assistance.

0
engine bay of 2024 GMC Canyon AT4
engine bay of 2024 GMC Canyon AT4
(click to enlarge)
battery of 2024 GMC Canyon AT4
battery of 2024 GMC Canyon AT4
(click to enlarge)
demco disconnect switch connection 2024 GMC Canyon AT4
demco disconnect switch connection 2024 GMC Canyon AT4
(click to enlarge)

Expert Reply:

Hey Enrique!

Thanks for reaching out and for including those photos! They really help me understand how you've got everything wired up. You've also brought up a very important concern because your 2024 GMC Canyon AT4 has some specific requirements for flat towing, and we definitely don't want to interfere with your Brake Buddy or the charging system.

First, you're absolutely right about GMC requiring the negative battery cable to be disconnected. This isn't just to prevent the battery from draining. GMC specifically warns that leaving the battery connected during flat towing could allow the electronic parking brake to engage.

The Demco Battery Disconnect Switch # DM63FR (Demco part 6338) is designed to be installed on the positive side of the battery. While a mechanical disconnect switch can physically interrupt either the positive or negative cable, I wouldn't recommend modifying the Demco installation to put it on the negative side without approval from Demco.

The bigger concern is actually your Brake Buddy and the charge line you've installed.

Your Brake Buddy needs a constant 12V power supply, even when the Canyon's electrical system is disconnected. If you interrupt the negative battery connection, the Brake Buddy's existing negative wire can potentially provide another path back to the vehicle's electrical system. Your RV charge line creates another concern because its ground is shared with the towing connector and lighting system. Depending on how everything is connected, this could create an unintended electrical path that defeats the battery disconnect.

That's why I wouldn't recommend simply moving the switch to the negative side and leaving your other wiring as it is.

Looking at your photos, I can see you've already installed a switch on the inner fender and have additional wiring coming directly from the positive battery terminal. One thing I'd want to verify is whether the switch actually interrupts the Canyon's main battery connection or only one of those accessory circuits. Disconnecting an accessory wire won't necessarily isolate the truck's electrical system.

As far as the included cable goes, the Demco kit comes with a battery cable, but depending on the mounting location and your factory connections, you may need an additional properly sized battery cable and terminal hardware.

For an alternative, we carry the Roadmaster Battery Disconnect # RM-766, which is specifically designed for flat-towed vehicles with supplemental braking systems. Like the Demco kit, however, it installs on the positive side, so I wouldn't consider it an automatic solution to GMC's negative-cable requirement without confirming your particular setup.

My recommendation would be to have Demco approve your new arrangement before making any changes. You'll need the Canyon's factory electrical system isolated while maintaining a properly fused power and ground circuit for your Brake Buddy and an appropriately protected charge line from your motorhome. I'll reach out on your behalf to see if I can find more information from Demco.

One question I have for you: Is the switch shown in your photos the Demco 6338 that you just purchased, or is that a different disconnect you've already been using? Also, when you disconnect the Canyon's negative battery cable, have you tested whether your Brake Buddy still powers up?

Those details will help me narrow down what needs to change without having you purchase parts you don't need!

expert reply by:
0
Jerry B
Enrique M. profile picture

Enrique M.

11/16/2026

Hello Jerry, Yes, the Demco 6338 switch, is the one I am referring to. I have not installed it. So far it’s just the Roadmaster Charge line and the 12v line to brake buddy. Let me test the negative battery cable with the brake buddy and I’ll let you know.

Jerry B. profile picture
Etrailer Expert

Jerry B.

11/16/2026

@EnriqueM That sounds great! In the meantime, I have an email out to Demco to get their opinion on this as well and I'll get you that info when I have it.
Enrique profile picture

Enrique

11/16/2026

@JerryB I disconnected the neg post and the brake buddy line did not work. I connected the Demco 6338 to the positive post, activated the switch and the trucks still had power. I am at a standstill, not sure what else to do.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>