Replacement Lower Mirror Glass for 2009 Monaco Dynasty Motorhome

Updated 11/13/2026 | Published 11/11/2026

Products Featured in This Question

Burco Replacement RV Mirror Glass Kit - Lower Convex - 5" x 8-11/16" x 9-1/4"

$57.99

Question:

I have a 2009 Monaco Dynasty with mirrors with camera openings on the lower mirror and they are heated. I am looking for just the glass part for my right side lower mirror. Here is some info I have gathered so far: Lower Convex Mirror: 8.5” x 5” InVue GLS171 RH/LH OEM Part : 10287465, RV Lower Convex Mirror 8 9/16” by 5 1/16” Ramco 10287465 part I think Do you carry that?

asked by: Patrick C

Expert Reply:

Hi Patrick,

For replacement lower glass for your 2009 Monaco Dynasty, the best fit is the Burco Replacement RV Mirror Glass Kit - Lower Convex part # BC44FR. Based off the OEM part's measurements of 8 9/16” by 5 1/16” the BC44FR is the closest in size with dimensions 5" tall x 8-11/16" wide x 9-1/4" diagonally. However, this replacement lower glass doesn't support the heating elements as it doesn't plug into the mirror. Burco does design replacement glass that is capable of plugging into the heating elements but we don't currently have an option with that feature for your motorhome.

How did the glass in your motorhome mirror get broken?

expert reply by: Claire H

Patrick C.

11/12/2026

It actually is missing and was missing when I purchased the motorhome. The main thing I’ve been looking for is a convex mirror with a hole for the camera that’s mounted on my mirror. It’s a great feature that I would like to continue using, but I can’t seem to find a mirror that has a hole for a camera like that

Claire H.

11/12/2026

@PatrickC I did some research and cameras weren't standard on the 2009 Monaco Dynasty and replacement generic glass is rarely sold with the pre-drilled camera hole. If you can identify who the manufacturer is of the mirror glass you may be able to order a direct replacement from them. There's a Monaco forum that mentioned Pacific RV Mirrors was able to get them glass with the cutout hole for the camera.

Patrick

11/12/2026

@ClaireH - The shade/blind part I ordered, based on our converstions, are the wrong size. I received my order last night, and when I went to install it, I found that what I received is too small for my shade, at least it appears that way to me. Please see the two pictures attached in the first one, the my roller/spring is the one on the top, and the roller/spring that you sent me is in the bottom. It appears that the one you sent is too small. Do you have the right one I can buy? Also, the motor shade parts you sent are the same way, they are too small, I need the size like the one in the picture (expect of course it will be motorized). Do you have the right one I can buy for the motorized shade? Here are some measurements I took: The spring diameter on your spring is 11.61mm The spring diameter on my (red roller) spring is 15,65mm The end piece diameter on my roller is 31,54mm And also, the mounting end piece on your is smaller than mine (see pic). Can you help me? Thanks, Bill

Claire H.

11/12/2026

@Patrick I've been made aware this week that we're having stock issues with these parts. Can you please email me the photos because they didn't attach to this comment. My email is [email protected].