Internal Dimensions Of The Benton MoveHitch Cargo Carrier B86VR

Question

Question:

I just want to know if I can fit my cooler on the rack its going to be close 50inch X 23.5. There is one set of dimensions provided, what I do not know is, are the dimensions for the interior or exterior?

asked by: John R

0

Expert Reply:

Hi John!

Sorry about that. The 60" x 24" we list for the Benton MoveHitch Cargo Carrier # B86VR are the inside measurements. The outside measurements would be 61" x 25". So with that said, your 50" x 23.5" cooler will definitely fit in this. Plus with its 500 pound capacity, you could definitely get a lot of ice and "tasty beverages" in there! ^___^

On that note, what are you going to be storing in your cooler? And what vehicle will you be using this in?

expert reply by: Lazer S

0

Benton MoveHitch 60x24 Cargo Carrier B86VR
(click to enlarge)

John R.

10/6/2026

Thanks! It is going of the reciever on my truck and I plan to have deer meat in it (If I am successful!)

Lazer S.

10/7/2026

@JohnR Oh nice! Good luck out there and let me know if there is anything else I can help with! ^___^

Answer 1

I do have a solution for you, but the 24x60 etrailer Cargo Carrier #e98874 is not designed to be used on the back of an RV. Generally speaking, folding carriers are not ideal because they do not stand up too well to the extra stress exerted by the…

view full answer...

Answer 2

Hello Tom, thanks for reaching out. There is no attachment made for the #e98874 cargo carrier that allows it to hold two bikes. It really should be used for cargo only, and you would need a separate carrier for the bikes. Yakima does make a hitch…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Timothy! I’m sorry to hear your etrailer 60x24 Folding Cargo Carrier #e98874 is already starting to show some rust. Living near the ocean is definitely tough on exposed steel, even with a protective powder coat. The Benton MoveHitch 60x24 Cargo…

view full answer...

Answer 5

Hey Neal! You can use the standard 5/8" Hitch Pin and Clip #e47RV for quicker installation and removal, or the Locking Hitch Pin #e98882 if you want to keep the carrier secured to the vehicle. Either way, you will lose the built-in anti-rattle…

view full answer...

Answer 6

Hey Frank! This is a newer product, so there aren't many long-term owner reviews available yet. That said, we have done extensive testing on the Benton MoveHitch #B86VR. A strain gauge was used to measure the forces the carrier experiences during…

view full answer...

Answer 7

Hi John! Sorry about that. The 60" x 24" we list for the Benton MoveHitch Cargo Carrier #B86VR are the inside measurements. The outside measurements would be 61" x 25". So with that said, your 50" x 23.5" cooler will…

view full answer...

Answer 8

Hey Michael, welcome back! The Benton MoveHitch 60x24 Cargo Carrier for 2" Hitches #B38VR you looked at does have a tilt away feature. This can help with loading/unloading, and also help clear a rear hatch. The tilt mechanism is one of the…

view full answer...

Answer 9

Terry, you've picked out a really nice combination for a family road trip. The Benton MoveHitch part #B86VR is lightweight at just 45 pounds, so it's much easier to install than many steel cargo carriers. The Benton HotMesh Cargo Net part…

view full answer...

Answer 10

Hello Erald, Thanks for writing in Yes, you are on the right track with the Roadmaster Dual Hitch Receiver Adapter #RM83SR and the Flint Hill Goods Cargo Carrier #FHG87ZR. The #RM83SR is made for exactly what you are wanting to do. You can put your…

view full answer...

Answer 11

Hey Doyle, welcome back! The push-button mechanism on the Benton MoveHitch Cargo Carrier #B86VR and #B38VR (with cargo net) is very reliable and has been thoroughly tested. It is actually one of the best features of the MoveHitch since it makes it…

view full answer...

Answer 12

Hey Garret, we actually have an LED light kit for the etrailer cargo carrier part #e98874 with the part #e67RV which puts a couple smaller light bars at the rear of the carrier like you can see in the attached picture. These will have the running…

view full answer...

Internal Dimensions Of The Benton MoveHitch Cargo Carrier B86VR

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching