What Bolt-On Brackets Can I Use with the Blue Ox SwayPro Weight Distribution Hitch?
Published 10/01/2026 >
Products Featured in This Question
Question:
I am considering a BXW1500 for my Featherlite Trailer. My tongue has a welded top on the A frame so I cannot use the chain bracket that hangs on the frame and clamps on. I need the bolt on style bracket. Is there a kit that includes the bolt on bracket because, otherwise, it looks like I would have to buy this additional part and discard the clamp on brackets. That add about $330 to the cost.
asked by: Eric L
Expert Reply:
Hey Eric,
Thankfully we do have a solution for this! The Blue Ox Signature Series Lift Brackets for SwayPro Weight Distribution Systems part # BXW4021 are designed to clamp OR bolt onto the trailer frame to increase mounting options and provide clearance. In this case though, it solves the problem of wanting to use chains but with bolt on brackets. It fits trailer frames between 3" and 6" in height and will require drilling through the trailer frame to create the bolt holes to secure it. They are specifically designed to work with the Blue Ox SwayPro weight distribution hitch part # BXW1500 so compatibility won't be an issue. All of the mounting hardware and a wrench is included to help with the installation. When picking a SwayPro to go with these brackets, you'll want to make sure to get one that is appropriately weighted for your trailer. Usually, we want a system where the trailer's tongue weight is about 50% of the hitch's capacity, so the hitch works its best.
How much does your Featherlite trailer weigh?
Product Page this Question was Asked From
Blue Ox SwayPro Weight Distribution w/ Sway Control for 2" Hitch - 15,000 lbs GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- 2-5/16 Inch Ball
- Fits 2 Inch Hitch
- Allows Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- Blue Ox
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Weight Distribution Hitch for 2026 Chevy Silverado 3500 Towing Brinkley Z Air 297
- Q&A: Replacement Pull Out Manual Steps for a 2015 Airstream International w/ 381863-01 Steps
- Q&A: How Wide Are the Blue Ox SwayPro Frame Clamps
- Q&A: What is Difference Between Overslung and Underslung Trailer Coupler
- Q&A: Is 15K Clue Ox SwayPro Weight Distribution Good for a 2012 Airstream Flying Cloud 27FB
- Q&A: Recommended Weight Distribution System for 1,175 lb Dry Tongue Weight Trailer
- Q&A: Can B and W Continuum Weight Distribution Hitch be Used with 8 inch Tall Trailer Frames
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Article: 4 Common Myths About RV Solar Power
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight



Eric L.
10/1/2026
Thanks for your response. My trailer is about 4000 lbs and the car I carry is about 6500 lbs. So the gross is probably 11 to 12,000 lbs. But my question wasn't answered exactly, I knew of the BXW4021 but that is an add on of $331.00. What I was asking was if there was a complete kit that included the weight distribution hitch and those bolt on brackets.