bing tracking image
Q & A Icon

Which Blue Ox Weight Distribution System for 2025 Grand Design 322FKT  

Updated 10/12/2026 | Published 09/29/2026

Question:

Hello, I have a 2026 Silverado 2500 HD 4 x 4 ZR2 that says the hitch mount is about 25 inches from the ground. Will this blue ox BLU 54TR work for me.? I’m pulling a 2025 grand design reflection 322FKTs travel trailer with the gvw 10,000lbs a tongue weight of 1200. I wasn’t sure if this 15 K set up would be too stiff as I’m probably only rolling with about 11,000 gvw and 1200 to 1300 tongue weight.

0

Expert Reply:

Hey Jarrod, thanks for all of the information you listed between your 2026 Silverado 2500HD and your 2025 Grand Design 322FKT. Based on all of that yes the Blue Ox weight distribution system part # BLU54TR will work great. This can do a drop of 5 inches which would allow the trailer to be towed level and also the tongue weight range is correct as well.

expert reply by:
0
Jameson C
Kelly profile picture

Kelly

10/1/2026

It worked great for me pulling our 35’ trailer. Made a huge difference. I too have a 2500 Hd. The only thing with the hitch was I was too low to the ground to install it like the direction but you can flip it and is approved to do that per manufacturer. It is a heavy hitch so it took me and my wife to hook it all up. But it is a great hitch and affordable. Also be sure to grease it!

Bob S. profile picture

Bob S.

10/1/2026

@Kelly, I agree 100%. I installed this hitch on my Sierra 3500HD, and had to flip the hitch to get the ball low enough for the trailer to ride level. As noted, I contacted Blue Ox and they confirmed that the hitch can be installed either way. Also agree on keeping the swivels greased! Great hitch, superb sway control.
Jameson C. profile picture
Etrailer Expert

Jameson C.

10/1/2026

@Kelly that's great to hear!
Jameson C. profile picture
Etrailer Expert

Jameson C.

10/1/2026

@Kelly that's great to hear!
Bill M. profile picture

Bill M.

10/1/2026

I drive a Ford F250 FX/4 and pull a 2026 Grand Design Reflection 322 FKT, I pull it from Dallas area to Zion NP where I work and it has worked very well, New Mexico and Arizona roads are terrible but the trailer hitch works great. Wish they offered it with a 3 inch but the 2 1/2 works, just don’t like using the 2 1/2 to 3 inch adapter.

Jameson C. profile picture
Etrailer Expert

Jameson C.

10/1/2026

@BillM Glad it's working well for you!
Denny profile picture

Denny

10/10/2026

I have had my Blue Ox WDS for a couple years now and works great. I'm pulling a 35' Salem Hemisphere. I upgraded from an Equalizer Hitch which was an okay hitch but was a pain if any adjustments needed made. I like the fact that this hitch uses chains for making the adjustments for the weight distribution. On rough roads I could reduce one link to smooth out the ride which I encountered during our trip our west last September/October. Friends we visited live where I drove 5 miles on roads were extreme washboard. Before we left there, I readjusted the chains as described above. I know someone mentioned how heavy the hitch was. I have the 2.5" shank setup and it's actually lighter than the 2" setup on my Equalizer. Make sure you remove most of the weight off the hitch before trying to remove the tension bars. If you don't it could be a painful experience.

Jameson C. profile picture
Etrailer Expert

Jameson C.

10/12/2026

@Denny thanks for sharing that! That's a really good tip about lowering a chain link when on bumpy roads.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>