Removing a Rusted Hitch Receiver Lock
Updated 09/29/2026 | Published 09/27/2026 >
Question:
Due to its age, my Anti-Rattle Trailer Hitch Receiver Lock for 2 Hitches - 3-1/2 Span that I purchased from you has rusted and the key wont fit into it. Can you suggest what I can do to get it removed so I can replace it?
asked by: Daniel B
Expert Reply:
Thanks for letting us help Daniel. If you still have the key for your Anti-Rattle Trailer Hitch Receiver Lock # 63232, I'd start by trying to free up the locking mechanism. I'd recommend applying a penetrating oil, such as Liquid Wrench, directly into and around the lock cylinder. Give it some time to soak in and work through the rust and corrosion. You can also use a wire brush around the outside of the lock to remove as much surface rust as possible. After it has soaked, try inserting the key and gently working it back and forth rather than forcing it.
If the lock still won't release you'll likely need to move on to a more destructive removal method. That would typically mean drilling out the lock cylinder or cutting the lock off with an angle grinder or similar tool.
Do you have an accessory mounted in the receiver currently?

Daniel B.
9/29/2026
WD40 and some hammering got the lock off but the rest of it was very corroded. The company you recommended, Mike's Auto Classics and RV successfully got the rest off using the destructive method. Thanks for the help.

Product Page this Question was Asked From
Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span
- Trailer Hitch Lock
- Universal Anti-Rattle Lock
- Keyed Unique
- Fits 2 Inch Hitch
- Spring-Loaded Pin
- 3-1/2 Inch Span
- Lets Go Aero
more information >
Continue Researching
- Q&A: Front Hitch Recommendation for Bike Rack for 2004 Fleetwood Tioga
- Article: Sidewinder with Rotating Turret for Short Bed Pickups
- Q&A: Front Mount Hitch for 2000 Ford E-450
- Article: Anti-Rattle Devices
- Q&A: Best RV Rated Cargo Carrier Option for Cooler, Generator and Bikes
- Q&A: Locking Hitch Pin Recommendation for Hitch Adapter # TH23JV
- Q&A: Recommended Cargo Bag for Pro Series # 63153 Cargo Carrier
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Can TorkLift Lock and Load Maximum Security Cargo Tray # TLA7752 be Used in Travel Trailer Hitch
- Q&A: Does etrailer Anti-Rattle Hitch Collar Work With Weight Distribution
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Hitch Anti-Rattle Devices: The Ultimate Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Best Hitch Cargo Carriers


Stephen
9/29/2026
I have had these units for years, but since they are outside in the elements (I dive of the beach at Hatteras Island a lot), once a month I spray them heavily with WD-40 as a preventative measure. But since it sounds like yours is beyond that, I suggest in addition to what Christopher said: Use 3-IN-one® lock dry lube to loosen, lubricate and protect home and commercial locks. Easily reach into narrow lock mechanism with the attachable straw or use the wider spray pattern to refurbish and protect the entire lock. 3-IN-ONE® lock dry lube dries clear to the touch within minutes and is safe to use on metal, wood and most plastic surfaces. Clear, quick-drying, premium lock lubricant to loosen and protect all types of stuck home, auto and commercial locks Easily reach into narrow lock mechanism with the attachable straw or use the wider spray pattern to refurbish and protect the entire lock Dries clear to the touch within minutes and is safe to use on metal, wood and most plastic surfaces except clear polycarbonate and polystyrene Aerosol formula penetrates quickly and deeply to loosen stuck locks