Bracket for etrailer e25VV Boat Winch
Updated 09/28/2026 | Published 09/27/2026 >
Products Featured in This Question
Question:
Hi, Will this winch fit the CE Smith Roller Bracket? What is the width of this winch?
asked by: Joe P
Expert Reply:
Hey Joe!
Yes, the Boat Trailer Winch w/ 23' Strap # e25VV will fit inside the CE Smith Bow Roller Bracket # CE31005PG. I actually measured and test-fit these two parts myself to make sure they would work together.
Using a digital caliper, I measured the winch at 3.91" wide. I then measured the opening in the CE Smith bracket at the bottom of the elongated mounting holes, and it was also 3.91". Because the measurements are essentially identical, the winch is a very tight fit in the bracket, but I was able to confirm that it does fit.
I've attached a couple of illustrations below showing where I took the measurements on both the winch and the bracket so you can see exactly how they compare.
What boat are you loading, and where do you usually launch
Product Page this Question was Asked From
Boat Trailer Winch w/ 23' Strap - 10-1/2" Handle - 1,600 lbs
- Trailer Winch
- Standard Hand Winch
- Boat Trailer Winch
- 1001 - 2000 lbs
- Ratcheting Hand Crank
- Single Speed Winch
- Polyester Strap
- etrailer
more information >
Continue Researching
- Search Results: 4 inch roller
- Q&A: 3-1/2 Inch Wide Trailer Boat Winch For Use With Bow Roller Bracket
- Shop: CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On
- Video: Review of etrailer Trailer Winch - Standard Winch - e25VV
- Video: Detailed Breakdown of the CE Smith Bow Roller Bracket for Winch Stands
- Shop: Boat Trailer Winch w/ 23' Strap - 10-1/2" Handle - 1,600 lbs
- Video: CE Smith Keel Roller Assembly for 2" Wide Trailer Tongues Spec Review
- Shop: CE Smith Bow Roller Assembly with Bells for 3" Wide Bracket - PVC - 1/2" Shaft - Amber
- Shop: CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide
- Shop: CE Smith Keel Roller Assembly for 2" Wide Trailer Tongues - Galvanized Steel and Black Rubber
- Shop: Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches
- Q&A: Are Additional Parts Needed for CE Smith Winch Stand
- Shop: CE Smith Multi Sport Boat and Kayak Trailer w/ Bunks - 8" Wheels - 12' Boat - 800 lbs
- Q&A: Kayak Carrier That Can Fit 1-1/2 inch Square Crossbars
- Video: All You Need to Know About the CE Smith Bow Roller Assembly with Bells for 3" Wide Bracket
- Video: Ultimate Overview of the CE Smith Galvanized Steel Step for Trailer Fender
- Search Results: trailer jack
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: spare tire mount
- Search Results: trailer safety chains
- Search Results: trailer winch
- Search Results: boat trailer winch
- Search Results: boat trailer winch trailer winch
- Q&A: Parts Needed to Add Electric Brakes to ShoreLand'r Boat Trailer
- Q&A: Axle Replacement For Tracker Trailstar Trailer
- Q&A: Correct Replacement for 10 Inch x 1-3/4 Inch Braking Assemblies
- Q&A: Determining the Correct Leaf Spring Length for Trailer
- Article: Trailer Couplers
- Article: Trailer Lighting Requirements



