bing tracking image
Q & A Icon

Distance From Hitch Pin Hole To Center of Hitch Ball On Blue Ox SwayPro  

Updated 09/29/2026 | Published 09/26/2026

Question:

I need to know the horizontal measurement from the hitch pin hole in the shank to the centre of the trailer ball. On my current and older design WD hitch I had to switch out the shank for a longer one in order to open my tailgate while hitched up. I need to know if this hitch will work for me. Thank you. 2014Ram 1500, 2025 Rockwood MiniLite 2205s

0

Expert Reply:

Hi Michael, welcome back! The distance from the center of the hitch pin hole to the center of the ball on the Blue Ox SwayPro # BLU66FR is approximately 13-1/2". You can compare this to your existing setup to see if you'll have enough clearance to lower the tailgate on your 2014 Ram 1500.

If you need additional clearance, you can replace the included shank with the Blue Ox # BXW4003. This moves the head 3" farther away from the truck, giving you approximately 16-1/2" from the hitch pin hole to the center of the ball.

How much clearance do you have with your current setup?

expert reply by:
0
Robin H
Blue Ox SwayPro Shank
Blue Ox SwayPro Shank
(click to enlarge)
Michael F. profile picture

Michael F.

9/28/2026

16" with the replacement shank I purchased. It was 12" with the original shank and my tailgate would hit the power tongue jack motor.

Robin H. profile picture
Etrailer Expert

Robin H.

9/28/2026

@MichaelF in that case I would go with the longer # BXW4003 shank. That will put you at approximately 16-1/2", so you'll have about the same clearance as your current setup.
Michael profile picture

Michael

9/28/2026

Of course, knowing thus now and already in possession of a shank that gives 16".... How do I order the hitch without the short shank that I do not need or wish to pay for?
Robin H. profile picture
Etrailer Expert

Robin H.

9/29/2026

@Michael unfortunately Blue Ox doesn't offer the SwayPro without a shank or with the extended shank included. You will either need to reuse the 16" shank you already have, if it is compatible, or purchase the # BXW4003 separately. What weight distribution system is your current shank from?
See All (5) Replies to Michael F. ∨

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>