What CRE3000 Suspension Kit Do I need For A 2024 Jayco Jayfeather 25RB?

Updated 10/08/2026 | Published 09/22/2026

Question:

I have a 2024 Jayco Jayfeather 25RB travel trailer and I wanted to get the CRE3000 suspension upgrade. Which is the one I would need?

asked by: Garrett T

Expert Reply:

Hey Garrett, thanks for reaching out. We will definitely have a CRE3000 suspension kit for your 2024 Jayco Jayfeather 25RB travel trailer, but there are a few measurements I'll need you to take before I can recommend a kit.

Specifically, I'll need to know the dimension of the current equalizer. Equalizers are measured across from center hole to center hole. Then you measure the height from those holes to the top hole. I've included a picture that shows the dimensions of the CRE3000 equalizer # MR27ZR. Basically, I'll need the red and blue measurements from your equalizer. Trailers are built around a certain equalizer size and shackle length, so it's important we match that up.

I'll also need to know the dimensions of your current shackle straps. Those are measured from center hole to center hole and the most common sizes are 2-1/4" long or 3-1/8" long so please confirm which one you have.

Shoot me those measurements when you get a chance and I'm happy to look into it and make sure you get the right thing.

Are you looking to replace just your equalizer, or are you wanting a shackle/wet bolt kit to go with it?

expert reply by: Jesse M

CRE3000 MR27ZR Dimensions
(click to enlarge)

Garrett T.

9/23/2026

I will get those measurements. Yes, I would like a shackle/wet bolt kit with it.

Jesse M.

9/24/2026

@GarrettT Sounds good. You know where to find me!

Garrett

10/7/2026

@JesseM I finally measured my current trailer's setup and took a picture for you. What is your email I can send a picture? In that picture of the MR27ZR, you sent, the measurement that is different on mine are the "RED" measurements. the 4" is 3" on mine and the 8" is 5 5/8" on mine.

Jesse M.

10/8/2026

@Garrett There is no way to add pictures to the comments on here (yet) but you can email them to me. My email is [email protected]. It sounds like you will need a slightly smaller equalizer like the Dexter # K71-652-00 which is 5-3/4" long. From here I'll really just need to know your shackle size.

James P.

9/24/2026

Be sure you have the right parts and pre-set everything. Be sure you have raised up your RV completely off the ground and both sides and have plenty of clearance to move around and work under. You’ll need a good sledgehammer and then of course the right wrenches, torque wrenches and so on. Watch lots of YouTube about how to do this job because not any single one YouTube is exactly the right way to do it so you kinda have to combine techniques and processes. I did mine last year. I also replaced the drums that you bolts. Make sure you look at those two you probably want to replace those two I replaced and packed all bearings inner and outer bearings with a with a new drums. I did a brake job on all four of my brakes. I just rebuild the all wheels, springs, wet bolts, and shackles. I also rotated all the tires. You can do this. Be sure to research and not torchs.

Jack B.

9/24/2026

Own 2018 GD 303 with tandem axil 5200lbs. Original Lippert equipment with springs flattened Decided to upgrade to Moryde 3000 equalizer, Hd Shackles, wet bolts and new springs 5 versus 4. Complete suspension replacement with Moryde3000. And just love the new ride and suspension. It’s just nuts and bolts and pretty easy diy project. About 3 hrs per side, I work slow. Highly recommend Moryde 3000 at the price level