How to Power a Light Bar w/ Backup Sensors that Turn Off When Connected to a Factory 4-Way
Updated 09/23/2026 | Published 09/19/2026 >
Products Featured in This Question
Question:
I have a 2026 bighorn with a tow package that has a 7 and 4 pin plug. I tapped into it with a tailgate light bar the bar has sequential directionals , running , break and backup. but now get a trailer in tow warning coming comes on and backup sensors disabled. I tapped into my rear lights and they immediately become disabled. Will this product bypass those issues? Or just add another 4 pin behind my bumper? The backup light is also not currently connected because tapping into the wire in the taillight automatically disables the backup light. Thanks.
asked by: Dana
Expert Reply:
Hey Dana. To power your lightbar, I recommend the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector item # C59236. This 4-way connector is going to splice directly into your Ram's tail light circuits and bypass the computer. It will power the brake, turn, and tail lights only by sending the signals directly to your light bar.
The Curt T-Connector Vehicle Wiring Harness item # C55384 is essentially just going to add another 4-way to the back of your truck. It connects to the same wiring harness behind your factory 7-way/4-way combo so you'll get the same response on the backup sensors from your Ram's computer.
Please note that I do not have a way to power the backup light on your light bar.
Do you tow a trailer or plan to with the light bar connected? Feel free to answer this and throw in any other questions you have, where it says Add Comment.
Product Page this Question was Asked From
etrailer Rubber Hitch Cover for 2" Trailer Hitches - Qty 1
- Hitch Covers
- Misc Covers
- Plain
- Rubber
- Fits 2 Inch Hitch
- Standard
- Square
- etrailer
more information >
Continue Researching
- Q&A: Does Curt Hitch for 2026 Toyota Corolla Cross Also Fit Hybrid Models
- Q&A: What's The Difference Between the etrailer and Demco Baseplate 2025 Jeep Wrangler
- Q&A: Best Trailer Hitch And Wiring Harness For 2026 Nissan Rogue Dark Armor Edition
- Q&A: Replacement For 7-Way Socket That Came With ETBC7/ETBC7L Kit
- Q&A: Recommended Hitch for a 2026 Toyota Corolla Cross and How to Install It
- Q&A: Will the Demco Excali-bar 9511006 Work With the Demco Tabless Kit On Jeep Wrangler Unlimited
- Q&A: Recommended Base Plate that Works With a 2024 Jeep Wrangler
- Article: Which Hitches are Made in the USA
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: What RV AC Will Work With Your Setup? Avoid Costly Mistakes Before You Order
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size



Dana
9/22/2026
I do haul a camper though not this year with this truck. I had a 2022 power wagon and a 2019 tradesman before that and that I wired with a similar light bar with no issues. But I will try this option and see how it goes. Thank you for an option to correct the issue. Dana.