bing tracking image
Q & A Icon

Does the Curt C73ZV Require Grinding on a 2024 Ram 2500?  

Updated 09/22/2026 | Published 09/16/2026

Question:

Does the curt hitch still require the bumper supports to be ground down to install on a 2024 Ram 2500 Big Horn with 4x4 and 6.4 gas engine?

0

Expert Reply:

Hi Mike,

No, the Curt part # C73ZV Front Mount Hitch does not require grinding down the bumper supports on your 2024 Ram 2500 Big Horn with the 6.4L gas engine and 4x4.

The latest installation instructions only call for minor trimming of the lower plastic bumper fascia, or air dam, to create an opening for the 2 inch receiver tube. There is no drilling or grinding of the bumper supports required. The hitch installs using the existing frame holes and the included hardware, so you will remove the lower impact bars, position the hardware inside the frame rails, slide the hitch into place, add the provided spacers at the forward mounting location, and bolt everything together. The only trimming is to the plastic fascia, which can be done with aviation shears or a utility knife.

What will you use the front receiver for winch, plow, or gear hauls?

expert reply by:
0
Heather A
Douglas profile picture

Douglas

9/21/2026

My install did not require any grinding. I even have a front grille and bumper guard installed. The space to get the blot hole aligned is tight with all those accessories. It has been a good addition to our truck. I use it to put a carryall rack out front for my ebike or other camping gear.

Heather A. profile picture
Etrailer Expert

Heather A.

9/22/2026

@Douglas Thank you for joining the conversation Douglas! What e-bike do you like to ride?

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>