bing tracking image
Q & A Icon

What Are the Mounting Hole Measurements for the TowSmart # TS68ZR Trailer Hitch?  

Updated 09/21/2026 | Published 09/15/2026

Question:

What is the centerline width demension from hole to hole on the bracket that mounts to car. From one side to the other?

0

Expert Reply:

Hello Matt,

Thanks for writing in!

I see that you have a 2000 Chevrolet Silverado entered in our fit guide, so I do want to point out that the TowSmart Trailer Hitch Receiver - Custom Fit - Class III - 2" # TS68ZR is not a fit for your Silverado. This hitch fits 2018 - 2028 Subaru Crosstrek excluding Hybrid.

TowSmart does not provide the mounting bracket measurements you were looking for. Since these are custom-fit hitches, we typically match the hitch to the vehicle rather than going by the mounting hole dimensions.

That being said, I went ahead and took a stroll out to our warehouse and measured one for you. The mounting holes closest to the receiver are 35" apart center to center, and the rear mounting holes are 34-1/2" apart center to center. I attached an image showing those measurements as well.

If you are looking for a hitch for your Silverado, I would be happy to help you find the right one. Just let me know if you have the 1500, 2500, or 3500 and whether or not you have a drop bumper.

What are you planning on using the hitch for?

expert reply by:
0
Kate F
Hole Spacing for Tow Smart Hitch
Hole Spacing for Tow Smart Hitch
(click to enlarge)
Matt profile picture

Matt

9/18/2026

Thank you for the answer to my question! It was helpful to my mission. I'm trying to find a bolt on solution to a 2001 Honda Stepwgn. This is a JDM vehicle so the US (or Etrailer) doesn't have a stock hitch for that vehicle. So I'm trying to make a one from a different vehicle fit. The sizing is very close and may do the job. A perfect fit would be 351/2 center to center. Front and back. Thanks for your help. Matt

Kate F. profile picture
Etrailer Expert

Kate F.

9/18/2026

@Matt My pleasure! However, I might have a better fit for you. One of the other experts already has an answer page stating that our etrailer hitch # e98842 hitch is 35-1/2" wide when measured from bolt hole to bolt hole. This one surprisingly is for: 2015 - 2027 Ford Transit T150 Cargo Van and Passenger Wagon 2015 - 2027 Ford Transit T250 Cargo Van and Passenger Wagon 2015 - 2027 Ford Transit T350 Cargo Van and Passenger Wagon Here is his answer page for the diagram: https://www.etrailer.com/question-514262.html Just thought I would bring that one to your attention as well. If you need any other measurements let me know.
Matt profile picture

Matt

9/18/2026

@KateF Oh that's almost perfect. It is on width except I need more drop from the mounting brackets to top of cross piece, like 31/3 to 4 inches, to clearvthe bumper. Can you track down something like that? Thans for your time. Matt
Matt profile picture

Matt

9/18/2026

Actually this might be the one if bracket width lines up. Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" Part Number: C14355 Do you have the measurements on it?
See All (4) Replies to Matt ∨

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>