Will etrailer Spare Tire Mount Work With 2017 Ram ProMaster 2500
Updated 09/28/2026 | Published 09/11/2026 >
Question:
I would like to confirm whether the spare tire mount kit e98ZR will fit the full spare aluminum wheels on my 2017 Ram Promaster 2500 I have a 2 hitch receiver. Thanks!
asked by: Kim G
Expert Reply:
Hey Kim! Yes, the etrailer Spare Tire Mount # e98ZR will work with the full-size spare wheel on your 2017 Ram ProMaster 2500. The adjustable mounting hardware will accommodate the bolt pattern on your factory aluminum wheel, and the carrier is designed to fit your 2" hitch receiver.
Is this a camper van or something else?

Scott G.
9/17/2026
I have used this spare carrier on 2 different 5th wheel trailers. What you need to look at is how far back the receiver is from the bumper edge. It has 2 alignment holes for placement. I currently have a 6 lug,16”, 16 ply spare on it. I have about 1 1/2” clearance from tire to trailer. I use an anti-rattle device to limit movement. You can secure it with a locking “D” pin also available from etrailer. Been a good product.


Kevin W.
9/17/2026
Hi Kim Yes it should work well for you, the stabilizing clamp that comes with it really stiffens it up nicfrom wobbling around. I have mine holding a 35" x 12.50-15 off road tire on an old jeep cj5. Be aware that if you will need to lift the full weight of the rim & tire combo pretty high to mount it to the carrier. The supplied hardware works, but the studs move out of location easily. I replaced mine with longer grade eight bolts, allowing me to replace the flimsy original bolt retainers with flange nuts facing out. This let's you tighten the bolts at their desired locations so they don't move around. Mount the backside of the rim to the outward facing nut flanges. Makes the tire replacement a little less stressful when you need it. I also rounded off the outward facing bolt tops like little domes making it much easier to get the wheel holes to match up with the bolts. Also: something to keep in mind, it will not take a standard hitch pin. It has a "D" shaped pin hole. A pin is supplied.



Product Page this Question was Asked From
etrailer Spare Tire Mount for Hitch - 2" Hitch
- Spare Tire Mount
- Hitch Mount
- Universal
- Car
- SUV
- Truck
- Van
- Standard Finish
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Will a 225/75R16 Tire and 8-Lug Wheel Fit On the etrailer Hitch Mounted Spare Tire Carrier # e98ZR?
- Q&A: Is There Lock that Comes with etrailer Spare Tire Mount for Hitch # e98ZR
- Q&A: Difference Between etrailer and Curt Trailer Hitch Spare Tire Mount
- Q&A: Will etrailer Spare Tire Mount Work With 315/75R16 Tires
- Q&A: How Accurate is the 2,000 lb BTBRV Tongue Weight Scale
- Q&A: Will The ShakeStopper Bumper Hitch MNT72VR Work For Carrying Two Electric Bikes?
- Q&A: Which Swing Away for Bike Racks Would You Say is Beefier in Design the Kuat or Swagman?
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Best Running Boards
- Article: Practice Safe Trailer Towing with These 4 Tips
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer



Kim G.
9/16/2026
Thanks Robin - it is a camper van and although I was able to release the spare from the cable/winch I am concerned in the future if I do release it I won't be able to get it back on based on Ram forum comments on seizing winch/cable issues. I was thinking f having this etrailer spare attachment as a backup!