bing tracking image
Q & A Icon

Availability of Gooseneck Pin Box for Atwood AB-72  

Updated 09/14/2026 | Published 09/06/2026

Question:

Hello, I just replaced my old long bed pickup with a short bed 2025 F350 crew cab and now I don’t have enough clearance between the cab and 5th wheel trailer. I ordered the Gen Y offset ball and it should be here in a couple days, but I don’t think that’s going to be enough clearance. I think I will need to change out the gooseneck hitch on the trailer also. My trailer is a 29’ 2000 Alpenlite. The numbers on the pin box are ATN2XYY031179. Model AB-72. What do you have in a goose neck hitch that will extend farther in front of the trailer to give me more clearance? Thank you

0

Expert Reply:

Hi Monty! What you have there is the Atwood AB-72 which is no longer around. I would try the Gen-Y offset ball # GY43XR first and see where that puts you on clearance. If it is really close, you could get by with it and just know your limitations when making tight turns.

None of the current gooseneck pin boxes are designed to fit that bolt pattern so replacing it isn't an option. You could also remove that adapter and switch to a regular 5th wheel hitch with a slider, which would give you the additional clearance you need.

expert reply by:
0
Robin H
Monty B. profile picture

Monty B.

9/10/2026

Is there a fifth wheel pin box that fits it and extends out in front of the trailer more. Then I could put a convert -a-ball gooseneck adapter over the pin? Thank you

Robin H. profile picture
Etrailer Expert

Robin H.

9/11/2026

@MontyB unfortunately, all of the 5th wheel pin boxes that fit the Atwood AB-72 bolt pattern have been discontinued, so we don't have a replacement that would give you the additional extension you're looking for.
Aj profile picture

Aj

9/11/2026

@MontyB I have the offset Gen X ball in my F250 and it worked great with my 28hb Grand Design camper. It gave the clearance you need.
Robin H. profile picture
Etrailer Expert

Robin H.

9/14/2026

@Aj thanks for sharing your experience! Hopefully Monty finds that the extra clearance from the offset ball is all he needs too.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>