Recommended Hitch and 4-Flat Wiring Harness for 2020 Ford Explorer
Updated 09/14/2026 | Published 09/04/2026 >
Products Featured in This Question
Question:
I have a 2020 ford explorer I want to put a hitch on I see you carry different brands which one do you recommend and y also need a 4 pin wiring kit
asked by: Shawn S
Expert Reply:
Hey Shawn!
I'm happy to help here! All of our custom hitch options for the 2020 Ford Explorer are great, but I personally prefer the etrailer Trailer Hitch Receiver # e29YR. It has comparable weight ratings like to the others like the 6,000 lbs towing capacity and 600 lbs tongue weight rating, but the part that differentiates this hitch is the matte black finish. This matte finish helps to allow the hitch to blend into the undercarriage of your Explorer, to give it more of a factory look. If you plan on installing this hitch yourself, it is possible, but you will need to lower the exhaust for installation and trim some of the body panels. If possible, I recommend having a helper to assist with these tasks to ease some of the burden of the installation. I've linked the installation instructions below for you to assess the installation before purchasing.
For wiring, you will need the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56093. This is a plug-and-play wiring harness, so the install will be very simple. After you remove a few panels, you'll be able to just plug into your factory plugs without needing to splice any wires. These installation instructions are also linked below for your reference.
To give you a cleaner setup after getting the wiring harness installed, you can add a Curt Mounting Bracket # C42CR and a Curt No-Drill Bracket # C57202 for mounting the 4-flat connector and keeping it out of the way of your hitch and out of your trunk space.
What are you planning to tow or haul with your Explorer? Are you getting setup for a trip or just adding a hitch to be prepared when needed?

John V.
9/10/2026
I have a 2021 ford explorer that I put the wiring harness on after buying my hitch and harness from etrailer. Pretty straightforward the most difficult thing was running the wire underneath to the battery up front. Would have been easy with a stall lift but I managed to install in 1 hr. Camper City wanted $250.



Product Page this Question was Asked From
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Best Trailer Hitch For 2023 Ford Explorer XLT
- Q&A: Replacement AC System for a 48209-0650 Coleman Mach 15 Power Saver Ducted Quiet
- Q&A: Will Hidden Hitch by Draw-Tite Trailer Hitch Receiver Fit a 2022 Ford Explorer ST-Line
- Q&A: Recommended Hitch for a 2023 Lincoln Aviator
- Q&A: Recommended Trailer Hitch For A 2022 Ford Explorer
- Article: Rooftop Cargo Carriers
- Q&A: Wiring Diagram For Roadmaster 4-Diode Universal Wiring Kit RM-15267
- Q&A: How Difficult Is It To Install The Draw Tite DT62GR On A 2021 Ford Explorer
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: 7 Common Questions Everyone Has About Trailer Tires


Scott B.
9/10/2026
Same exact vehicle. Fits great. I don’t have the tow package so the harness is irrelevant for me. Sad face.