Anti-Rattle Device Recommendation for 2018 Toyota Highlander with OEM Hitch

Updated 09/02/2026 | Published 08/26/2026

Question:

I have a 2018 Highlander with a factory installed hitch. There is no lip on the receiver so I cant use the etrailer anti rattle device. Also, the top of the receiver is covered with thick vinyl. I tow a 17 foot casita with 250 to 300 tongue weight. Which anti rattle device can I use?

asked by: John T

Expert Reply:

Hey John, since you said you are towing your ball mount should have a hollow shank ball mount which means the best anti-rattle device will be the part # 63232 which doubles as a hitch lock as well. Once installed it would hold the ball mount tight to the hitch tube which would get rid of all movement and prevent theft as well.

expert reply by: Jameson C

Mark

9/2/2026

I purchased this anti rattle hitch lock and installed it on my Tundra Hitch then drove it from SoCal to Alaska and back. I had no issues whatsoever and it performed perfectly. I highly recommend it. It takes about 5minutes to install but once installed it works great. Mark G

Jameson C.

9/2/2026

@Mark that's great to hear!

Joe

9/2/2026

I bought this hitch lock a few years ago for my 2005 Pathfinder with a factory receiver. There's not much room for the lock cylinder but it will fit. Fortunately, if you don't need the lock, the anti-rattle feature still works great. I carry a 5/8 box wrench to tighten and loosen the screw in hitch pin.