Recommended EZ Lube Galvanized Idler Hub w/a 5 on 4-1/2 Lug Nut Pattern for a 3,500 lbs Axle

Updated 08/27/2026 | Published 08/22/2026

Products Featured in This Question

Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized

(832)

$64.98

Question:

Is item AKIHUB-545-35-G-EZ-K one hub or set of two?

asked by: Robert M

Expert Reply:

Hey Robert welcome back! The Easy Grease Trailer Idler Hub Assembly item # AKIHUB-545-35-G-EZ-K is sold as an individual hub. You'll need two of these to replace both hubs on a 3,500 lbs axle.

The Trailer Idler Hub Assembly item # AKIHUB-545-35-G-EZ-K is designed to fit 3,500 lbs axles with the standard #84 spindles and has a 5 on 4-1/2 lug nut pattern. This hub comes with new bearings, races, lug nuts, a grease seal, and a new grease cap.

The Trailer Idler Hub Assembly item # AKIHUB-545-35-G-EZ-K is galvanized for protection against corrosion so it'll work great on a boat trailer. It's designed for EZ lube or Super Lube axles that have a grease zerk at the end of the spindle. The included grease cap will provide easy access for maintenance.

What kind of trailer are you replacing the hubs on and what do you use it for? Feel free to answer this and throw in any other questions you have, where it says Add Comment.

expert reply by: Jerred H