Will Lucas Marine Grease Work in Trailer Hub and Drum Assembly # AKHD-545-35-K
Updated 08/14/2026 | Published 08/09/2026
Question:
What grease can I use to add on to the pre-greased hub to be sure its a compatible grease to what was used at the factory? Would Lucas Marine grease be OK?
asked by: Scott
0
Expert Reply:
Hey Scott, yes Lucas marine grease would be great in the Trailer Hub and Drum Assembly # AKHD-545-35-K that you referenced. That is a perfectly compatible grease that will work great. What kind of trailer do you have and did you have a bearing go out in your current hub?
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: An In-Depth Look at the Camco RV Vinyl Trim Insert
- Shop: Rubber Trim for RVs, Boats, and Utility Vehicle Trim Molding - 25' Long x 7/8" Tall
- Shop: Camco RV Vinyl Trim Insert - Black - 100' Long x 3/4" Wide
- Shop: Rubber Trim for RVs, Boats, and Utility Vehicle Trim Molding - 10' Long x 7/8" Tall
- Shop: Rubber Trim for RVs, Boats, and Utility Vehicle Trim Molding - 15' Long x 5/8" Tall
- Shop: Rubber Trim for RVs, Boats, and Utility Vehicle Trim Molding - 30' Long x 5/8" Tall
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Q&A: Dometic Soft Start for Dometic B59516.711C0-MX
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Search Results: trailer jack
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Video: In-Depth Look at the B&W 5th Wheel to Gooseneck Pin Box
- Shop: Brake Controller
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Shop: Gooseneck Hitch
- Search Results: trailer lights
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Shop: Base Plate for Tow Bar
- Video: Feature Breakdown: Rubber Trim for RVs, Boats, and Utility Vehicle Trim Molding
- Search Results: rv air conditioners
Richard S.
8/14/2026
You don’t want to use anything thick grease, it will not grease the bearings correctly and will cause failure eventually. I’m sure any marine grease for bearings will work fine!