What Rear Anti-Sway Bar Fits a 2014 Chevy Silverado 2500 w/o a Factory Sway Bar?

Question

Question:

I have a 2014 Chevy Silverado 2500HD 6.0 Liter truck. I also have the 6.5 ft bed and single wheel axle. I also have no rear sway bar set up. Will this model sway bar fit even if I dont have an existing sway bar? Just trying to save some money.

asked by: Paul M

0

Expert Reply:

Hi Paul,

The Hellwig Adjustable Rear Anti-Sway Bar - 1-1/8" Diameter Part # HE29YR is not designed to fit a 2014 Chevy Silverado 2500, it is actually meant for Arctic/Textron side-by-sides.

If your truck has been lifted 2" to 4", to add a rear anti-sway bar to your truck you can use the Hellwig Adjustable Rear Anti-Sway Bar - 1-1/4" Diameter Part # HE85YR.

If your truck is stock height, you can use the Hellwig Adjustable Big Wig Rear Anti-Sway Bar - 1-5/16" Diameter
Part # HE56FR.

Both of these kits come with all the U-bolts, hardware, and brackets necessary to install a rear anti-sway bar even if your truck didn't come with a factory sway bar.

What do you usually haul/tow with your truck?

expert reply by: Claire H

0

Paul M.

8/3/2026

1990 Lance 480 camper. Wanted to upgrade to a Northern Lite 8-11 EX LE.

Claire H.

8/3/2026

@PaulM The Northern Lite 8-11 EX LE is a nice-looking camper! Whoever designed it did a great job utilizing the space too, much more room for storage and to move around.

Lyn

8/4/2026

Hellwig BigWig on my 2013 GMC Sierra HD Definitely makes for a more controlled ride (with timbrens and Tirklift tie downs) on those two lane back roads in particular. Love my truck and want to be kind to her, so bigwig was this years gift to my set up (2022 Lance 825)

Claire H.

8/4/2026

@Lyn Glad to hear it's working out for you! Sounds like the Big Wig was the perfect finishing touch to your setup. Between that, the Timbrens, and the TorkLift tie-downs, it's great to hear your Sierra feels more stable on those back roads.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The differences between the Firestone Ride Rite #F2613 and the Red Label #F2709 for your 2023 GMC Sierra 3500 Crew Cab Long Bed is the air pressure and max weight capacity. The Ride-Rite #F2613 are rated for 5,000lbs and 100 PSI, where the Red Label…

view full answer...

Answer 9

Hey Steve, The AirLift airbags with internal jounce bumpers are not able to be added to a system without so you would need to get a whole new system. With that said the system with the internal jounce bumpers is going to create a much rougher ride…

view full answer...

Answer 10

If you're towing most of the time then I would go with the Timbren Rear Suspension Enhancement System #TGMRCK25D. These will provide the most support for your 2020 GMC Sierra 2500 while towing your 5th wheel. If you're more concerned about…

view full answer...

Answer 11

For your 2015 GMC Sierra 3500 Denali DRW 4x4, I recommend using the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs part #F2709 over the Air Lift LoadLifter 7500 XL Air Helper Springs part #AL57538 for two reasons. The first reason is…

view full answer...

Answer 12

Hey Steve, welcome back! The difference between these two Hellwig Adjustable Big Wig Rear Anti-Sway Bars is the fitment. The #HE94FR is designed for 4WD models and the #HE97MR is designed for 2WD models. Since your 2019 F-250 is 4WD you need the…

view full answer...

What Rear Anti-Sway Bar Fits a 2014 Chevy Silverado 2500 w/o a Factory Sway Bar?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching