Do I Need Sway Control for My 15-Foot Mobile Scout Camper Towing with Honda Pilot?
Updated 07/27/2026 | Published 07/21/2026 >
Question:
Just a quick question, and need to know the truth! I have a vintage Mobile Scout camper that is 15 ft. I pull it with a 2010 Honda Pilot. Do I, or do I not need sway control?
asked by: Debbie A
Expert Reply:
Hello Debbie,
Thanks for writing in! I'm glad you found us!
Generally speaking, sway control is recommended, but it isn't always required. With a 15-foot vintage Mobile Scout behind your 2010 Honda Pilot, it really comes down to how the camper is loaded and how it tows.
The first thing you'll want to do is make sure the camper is loaded correctly. Your loaded tongue weight should be 10% to 15% of the trailer's total loaded weight. For example, if your Mobile Scout weighs 2,500 lbs loaded and ready to camp, your tongue weight should be between 250 and 375 lbs. If it weighs 3,000 lbs loaded, your tongue weight should be between 300 and 450 lbs. If your tongue weight is below that range, the trailer isn't loaded properly, which is one of the most common causes of trailer sway or fishtailing.
Once you've confirmed the trailer is loaded correctly, take it for a drive. If it tows straight and feels stable, you likely don't need to add sway control. If you notice the trailer moving around in crosswinds, when being passed by larger vehicles, or at highway speeds, you will want the Equal-i-zer Weight Distribution System with 4-Point Sway Control - 4,000 lbs GTW, 400 lbs TW # EQ37040ET. It will distribute the weight more evenly across your Pilot while providing built-in 4-point sway control to help keep the trailer tracking straight behind you.
Did you just buy the camper? Have you been able to take it out for the first trip?
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 4,000 lbs GTW, 400 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- 2 Inch Ball
- Fits 2 Inch Hitch
- Allows Backing Up
- 200 lbs
- 300 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Weight Distribution System w/ Sway Control for a Trailer w/a 1,050 lbs Tongue Weight
- Q&A: Will # FA92-00-0450 Work For 2023 Ford Maverick Towing Modern Buggy Hopper 1?
- Q&A: Weight Distribution System For Towing A Grand Design Imagine XLS23LDE With A Ford F-250
- Q&A: Roof Rack for 2021 Sunset Park Sunray 149
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Best Weight Distribution System for a 5,000 Lbs Trailer
- Q&A: Weigh Safe True Tow Weight Distribution System For 7,600 Pound Trailer
- Article: How (and Where) to Connect an RV Propane Grill
- Q&A: Recommended Tongue Weight Scale for a 22" Tall Coupler Height
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Best Bike Racks for Electric Bikes
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)



Debbie A.
7/27/2026
I bought it one year ago, and have been on 4 trips. I am a bit nervous at interstate speeds, more comfortable at 65, which is why I kinda prefer 2 lane highways! I notice a sway in the right lanes on interstates where they are rutted a bit more.