Can the Tie Down Single Round Fender Be Used as a Step

Question

Question:

are these strong enough to use as a step to get into the boat?

asked by: Chuck

0

Expert Reply:

Hey Chuck,

Thanks for your question. Since the Tie Down Single Round Fender # TD95VR isn't designed with an integrated step, the manufacturer doesn't provide a weight capacity and is going to recommend it not be used as a step. While the fender will certainly support some weight when it's properly mounted, there's no reliable way to determine how much weight it can safely handle.

If you're specifically looking for a fender that can double as a step, something like the Tie Down Fender with Built-In Step # TD86VR would be a much better choice. Even though it's made from durable plastic, it's designed for that purpose and carries a 200-lb weight capacity.

What sort of boat and trailer setup are you running?

expert reply by: Christopher H

0

Chuck

7/21/2026

I ordered the Fulton 8563 from etrailer along with tires and wheels. . One fender is on the way, other is back ordered.

Christopher H.

7/22/2026

@Chuck Glad you found an option that will work for you. Let us know if you need anything else.

Answer 1

The best option we have that matches what you described is the CE Smith Single Axle Trailer Fender part #CE17800G which measures 27-3/8" long x 8" wide x 11" tall. This is a universal fender that will require drilling/bolting/welding…

view full answer...

Answer 2

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 3

Thanks for the pics Kemo, they really helped! The CE Smith Single Axle Trailer Fenders #CE19504-2 are larger than what you currently have and use a different mounting style. Based on your setup, the CE Smith Fenders wouldn’t bolt onto your existing…

view full answer...

Answer 4

Hey Terry! In order to mount the CE Smith Fenders #CE19504-2, normally I recommend #CE26098G-2 or #CES54XR (x 2) depending on your application. Do you know if you need the 90 degree bend to attach to the frame of the trailer, or the straight bracket?…

view full answer...

Answer 5

Hey Elden, we don't have an extensive galvanized fender selection but we do have the part #TD95VR which is pretty close to what you mentioned as it is 8" tall x 27-1/2" long x 11" wide. It's a little wider than what you…

view full answer...

Answer 6

Hey Jeff, we can definitely help but the pins that go into the breakaway switch are not all universal and unless you know what brand it is the best solution is to just replace the entire switch like with the part #420000 as this approach is universal…

view full answer...

Answer 7

A 4.80-12 trailer tire and wheel such as the Kenda #AM30630, when inflated will measure 20.7 inches in diameter and have a width of 4.9 inches. A 175/80-13 trailer tire and wheel will measure 24 inches in diameter and have a width of 6.6 inches so…

view full answer...

Answer 8

It is possible you can just swap out a 4-lug hub with a 5-lug hub so long as you know the hub you need. And in order to determine this (if you aren't sure already), there's a number of things you'll need to know. First, you need to know…

view full answer...

Answer 9

I have a solution for you, but you will need to cut off your existing plug and re-wire this to a new 4 way connector. Your current trailer plug appears to have wires for the left (yellow) and right (green) turn signal, brown wires for the running…

view full answer...

Answer 10

When choosing a replacement boat fender you want to do your best to match the dimensions of the new fender to your old one. Most of the time you aren't going to find a perfect match. We don't have a fender available that has those exact…

view full answer...

Answer 11

I do have some options for you but we can't really reference any of these numbers. The best way to determine the correct replacement hub/drum would be with the bearing number and you can either pull apart the hubs and looks for these numbers on…

view full answer...

Can the Tie Down Single Round Fender Be Used as a Step

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching