What Is CargoSmart Lubricant Shelf Made Of

Question

Question:

I can’t see how the price could be this for a plastic bin

asked by: Brian

1

Helpful Expert Reply:

Hey Brian! The CargoSmart Lubricant Shelf w/ Dividers # 3481738 actually has a steel construction. It is not a plastic bin, which accounts for some of the cost. This is designed to mount on your existing E track or X track system.

What will you be using it for?

expert reply by: Robin H

1

CargoSmart Lubricant Shelf
(click to enlarge)

Joel P.

7/16/2026

It’s metal constructed and rugged. Very easy to use and lots of configurability. I’d buy again no doubt.

Answer 1

I went out to the warehouse and pulled the Rack'Em lubricant rack #RA-10. Overall it is 32 inches tall and 21-1/2 inches wide. The round openings for bottles are approximately 3 inches in diameter.

view full answer...

Answer 2

The first thing you'll need is a power inlet to receive power from the shore power pedestal. You'll most likely only need 30amp service since you're in an enclosed trailer so I recommend the Hughes Autoformers Safe View Smart Power Inlet…

view full answer...

Answer 3

Hey Dustin. I installed the Enclosed Trailer Transition Plate item #M368FR on a trailer here when we first got them in and you're good! That plate is single solid piece of steel. It's got a heavy duty piano style hinge that has been riveted…

view full answer...

Answer 4

Trailer or automotive wheels can have a positive or negative offset. The offset refers to the distance between the mounting surface of the wheel that touches the hub and the center line of the wheel, as shown in the diagram I have edited for you. A…

view full answer...

Answer 5

I'd go with the part #UF21-001091. It locks the tire of each axle so well to each other that the trailer would not roll at all if pushed while you were hitching up. I attached a review video for more info. If you wanted to be super cautious a…

view full answer...

Answer 6

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 7

Hey Kent, That original power converter, although unnamed, is a Parallax or MagneTek brand converter. They are different companies but essentially the same part, or identical parts. With that said we do have a Progressive Dynamics Power Converter,…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

What Is CargoSmart Lubricant Shelf Made Of

Product Page this Question was Asked From

Continue Researching