Recommended D Washer for a 7/8" - 14 Castle Nut
Updated 07/02/2026 | Published 06/30/2026
Products Featured in This Question
Question:
Hi, I Have A 2000 Ez Loader Trailer And Just Replaced My Hubs. My Spindles Are Using A 7/8-14 Castle Nut But Cannot Find A Correct D Washer, Need Help
asked by: John C
0
Expert Reply:
Hey John, welcome back! For a D washer that fits a 7/8" - 14 castle nut like item # 165931, you'll need the D Washer for EZ Lube Spindles item # 5-23. This washer has a 1-11/16" outer diameter, a inner width of 1", and a inner height of 15/16".
What kind of boat do you have?
You can add this information, along with any other questions you have, where it says Add Comment.
expert reply by:
Jerred H
0
5-23
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Continue Researching
- Q&A: Length of Parking Brake Kit Cable
- Q&A: Material of D Washer for EZ Lube Spindle
- Article: What RV AC Will Work With Your Setup? Avoid Costly Mistakes Before You Order
- Q&A: Method for removing and Installing Tang-Style Spindles Washers
- Q&A: Recommended Hitch and Trailer Wiring for a 2026 Mazda CX-90 PHEV
- Q&A: Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
- Q&A: Correct D-Washer for Spindle That measures 1.06" Where the Bearings Sit
- Q&A: Replacement Solera Arms for Awning that Measure 63 inches
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub