Looking For Replacement Cover For MaxxFan 4700G Roof Vent

Question

Question:

I’m looking for a replacement cover to fit a maxair 4700G? Not seeing one.

asked by: Scott

0

MaxxFan 4700G
(click to enlarge)

Expert Reply:

Hey Scott, thanks for reaching out. If you're looking for a lid for your MaxxFan 4700G, you can use one of the MaxxAir UniMaxx Universal Replacement Lids. We have them in Translucent Smoke Item # MA00-335002 or # MA00-335001 for white.

If you are looking for a rain cover, you can use part # MA00-933066. This is a universal cover that works with pretty much any standard size roof vent like your 4700G.

What camper is the vent on?

expert reply by: Jesse M

0

Scott

7/1/2026

Thanks I’ll get one ordered

Jesse M.

7/1/2026

@Scott Awesome! Glad to help. Let me know if you ever need anything else!

Answer 1

I've attached pictures showing the pretty much every dimension of the Replacement Exterior Pop-Up Roof Vent #RV-626-062. If you need any other measurements please reply back and I'll get them for you.

view full answer...

Answer 2

Yes, I have attached the wiring diagram of the Replacement Electric Jack Switch with Harness #LC387874 for you to reference. Basically the Blue wire goes to a 6A auto reset breaker, like part #LC134181, which then goes to the positive circuit for…

view full answer...

Answer 3

I spoke to my contact at Bulldog and he informed me that the Bulldog Powered Drive Kit part #BD1824200100 that you referenced can only be installed on the driver side of the trailer due to how the gears of the jack setup. To see how it all wires up…

view full answer...

Answer 4

I attached pictures that show how the switches of the Bulldog Powered Jack #BD500187 get wired.

view full answer...

Answer 5

Thanks for the photo; the hinge type for your vent lid is the continuous kind you mentioned, though there have been many issues with fits (as you found out) when replacing that lid. What you can use instead is a simple universal option that installs…

view full answer...

Answer 6

Thank you for the photo; from that it looks like you have a 4-point hinge (like in the accompanying photo I added) and we do have a cover, the Vent Cover for Jensen Trailer Roof Vents - White #61628 which may work for you. If you have an older vent…

view full answer...

Answer 7

Hey Matt, Furrion typically has 4 wires running to their thermostats and the Chill Cube Thermostat #LC74DX is no exception. The harness you see with the thermostat would plug into the Chill Cube's controller and has 4 wires to extra wire to to…

view full answer...

Answer 8

Since your RVP AC is the parent company and owner of Coleman that means they'll have the same wiring so any AC that replaces a Coleman setup will be good. For your RVP 8000 Series AC I recommend replacing it with the Furrion Chill HE Replacement…

view full answer...

Answer 9

The lights inside of the trailer most likely run to a trailer battery and aren't getting power from the 7-way connection to the tow vehicle. To confirm you'll need to unmount the light and trace the wires back to their source. There would…

view full answer...

Answer 10

So long as it is a Solera roller like item #LC33FR or item #LCV000211518 it will. The roller tubes are brand specific so if your tube isn't a Solera it won't be compatible with the Replacement Support Arms for Solera 12V XL Power RV Awnings…

view full answer...

Answer 11

For your 2005 Fleetwood Gearbox I have no way of knowing what vent you have. What I can do to assist is let you know there are 4 possible hinges that determine the fit. I've attached a photo to show you the differences. Once you know which one…

view full answer...

Looking For Replacement Cover For MaxxFan 4700G Roof Vent

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching