Will CE Smith 2,700lb 5 on 4-1/2" Hub CE13315 Work With 12" Wheels On Yacht Club WC112G PWC Trailer?
Updated 06/23/2026 | Published 06/20/2026 >
Products Featured in This Question
Question:
Checking to see if this hub will work with a 12inch tire - all the other specs seem to match what I need for Yacht Club WC112G PWC trailer: Lug Spacing: 5 x 4.5 Spindle: 1 1/16 x 1 1/16 Inner and Outer Bearing: 44649 Race: 44610 Seal: 471750
asked by: Ted
Expert Reply:
Hey Ted, the CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased # CE13315 will work as long as all your specs match. It does say it fits 13" or 14" wheels on our site, but CE Smith technically says it'll fit anything UP TO 14", so you'll be fine. I'll send in an update on our site to match what CE Smith says :).
Is there anything else you needed on this trailer? I assume it's for a jet ski?
Product Page this Question was Asked From
CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Marine Grade
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 8 Inch Wheel
- CE Smith
more information >
Continue Researching
- Q&A: Replacement Hubs for 2,700 lb Axle
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Replacement Trailer Hub for the TDE 46205 with Galvanized Finish
- Q&A: Identifying Nut Used For Hub Installation On Boat Trailer With AutoFlex-Knott Axle
- Q&A: Looking for 5 Lug Trailer Hub that Fits Spindle that is 1-1/16 inch Diameter
- Article: Most Popular Wheel Bearings
- Q&A: Replacement EZ Loader Trailer Hub for Spindle that is 1-1/6 inch in Diameter
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Slipper Spring Trailer Suspension System Review
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)


Ted
6/23/2026
Thanks for the reply. I actually just ordered a bearing kit for the hub, yes it is a pwc trailer