Will Easy Grease Hub and Drum Assembly Work With TruRyde Electric Trailer Brakes
Published 05/24/2026 >
Products Featured in This Question
Question:
Hello, I have a 2022 Flagstaff 425M pop up camper. I want to replace the hub/drums and electric brake assemblies. Will brake assembly TRU36FR and hub/drum AKHD-545-35-EZ-K work together? I want to use Timken bearing kits instead of the chinese bearings that come with the hubs. Are there hubs available that dont have the bearings, races and seals already installed? Thank you, Brent
asked by: Brent S
Expert Reply:
Hey Brent! The Easy Grease Hub/Drum # AKHD-545-35-EZ-K and TruRyde Electric Trailer Brakes # TRU36FR will work together. However, all of ours come pre-greased aside from the galvanized hubs which cost quite a bit more.
The Dexter # 84546UC3 is the best option for a standard hub/drum that won't come pre-greased. This will make it a little easier to add the Timken # TMK52VR. If you don't have grease already, you can pick up some LubriMatic LMX Industrial Strength Grease # L11390.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Surge Brakes for Demco KK260 Tow Dolly
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Q&A: Replacement 10" Electric Brakes For A 2019 nuCamp T@G Trailer
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: How to Add Electric Brakes to a 3,500 lb Lippert Idler Axle
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Article: Most Popular Wheel Bearings


