bing tracking image
Q & A Icon

Replacement Spark Igniter for Furrion 2-in-1 RV Range Oven  

Updated 05/19/2026 | Published 05/15/2026

Question:

I am looking for a replacement ignitor the ceramic one near the burner for a Furrion 2-1 range assembly. I can only find a complete burner assembly on your site FR64PR. Is the ceramic ignitor and wire available seperately? Thank you

0

Expert Reply:

The main ignitor is replaceable Rick but not the one on the burner. To replace the ignitor on your Furrion 2-in-1 range, you'll need the Replacement Spark Igniter item # FR77PR. This replacement part is going to swap out the entire igniter assembly and get your burner back up and sparking.

Now you mentioned the cable and specific ignitor for a burner. That one piece isn't available separately. It's typically not what goes out but I'd like to give you a troubleshooting option so we can rule out needing to replace your entire left side burner with item # FR64PR.

If you open up the top of your stove cover you'll be able to follow the ignitor wire from the left side burner item # FR64PR to where it connects to the Spark Igniter item # FR77PR. Go ahead and make sure that ignitor wire is plugged in and secure. If it doesn't start working swap it out with another burner and the ignitor. This will rule out the ignitor on the burner being the problem.

Here's the replacement burners we have available for your stove:

Left Side item # FR64PR

Middle Burner item # FR37PR

Right Side item # FR36NR

Which burner on your stove isn't sparking and are the other ones working ok? If you're like me you only use one burner when you cook so it's possible you just wore that one out on the ignitor assembly.

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by:
0
Jerred H
FR77PR
FR77PR
(click to enlarge)
Steven D. profile picture

Steven D.

5/19/2026

Had the same problem, Rick. The part Jerred got me did the trick. Happy camping!

Jerred H. profile picture
Etrailer Expert

Jerred H.

5/19/2026

@StevenD Glad you were able to get your stove back up and running! Thanks for taking the time to leave that feedback!
Rick H. profile picture

Rick H.

5/19/2026

Okay, Thank you Jerred, I swapped two of the wires atthe ignitor and the one that was not working, now works and the previously working one does not work...so it looks like the ignitor is the problem. Need to get one ordered to resolve the issue and keep the boss happy. Sincerely, Rick

Jerred H. profile picture
Etrailer Expert

Jerred H.

5/19/2026

@RickH You're welcome! Glad you were able to find the problem.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>