Will Kodiak Disc Brakes Work For Venture VATB-8025
Updated 05/04/2026 | Published 04/30/2026 >
Products Featured in This Question
Question:
I am lllolkng to replace my boat trailer brakes on a Venture VATB-8025. Boat is in salt water. Wondering if Kodiak which ones would work for me? Only 1 axel has brakes fhanks -Jared
asked by: Jared H
Expert Reply:
Hi Jared; you can use Kodiak disc brakes on your Venture VATB-8025 but you will need to identify the axle first. Based on the typical GVWR for that model, you probably have 3,500 lb axles. You can either use the axle tag to identify them, or pull off a hub and check for bearing part numbers/measure the spindle.
Assuming it is a standard #84 spindle on a 3,500 lb axle, the Kodiak Disc Brakes # KOD67FR will fit. These have a Dacromet coating with a 300-400 hour salt spray rating. You may also want to consider a stainless option like the DeeMaxx # DE46YR for better corrosion resistance. Both use a # L68149 inner and # L44649 outer bearing.
Does your other axle have a brake flange? Assuming it does, I recommend adding brakes to both axles. They really aren't designed to work solo on a tandem setup, manufacturers do that because it is the lowest cost for them to be compliant with local laws.
What kind of boat are you towing?

Jared H.
5/4/2026
I looked at the link you sent , I currently have 6 lug hubs.
Product Page this Question was Asked From
Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - E-Z Lube
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Hub and Rotor
- 1/2 Inch Studs
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Recommended Disc Brake Hubs, Lines, and Hydraulic Actuator for a Boat Trailer w/a 3,500 lbs Axle
- Q&A: Troubleshooting Surge Brake Boat Trailer that Makes Slamming Sound When Hitting Bumps
- Q&A: Solution for Needing Replacement Disc Brake Componentts for Venture Boat Trailer # VATB-5225
- Q&A: Surge Brake Actuator Replacement Recommendation for Atwood Model 84132
- Q&A: Replacement Disc Brakes for Trailer With Dexter Disc Brakes
- Q&A: Steps To Determine Correct Replacement Bearing Kit for 2005 Karavan BW-2350-74-ST Boat Trailer
- Q&A: Replacement Actuator for Atwood on 1987 EZ Loader Boat Trailer
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: RV AC Not Cooling? What's Normal, What to Check, and When to Replace
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: How Long will the Axles Last on my Boat Trailer?
- Article: Trailer Wiring Diagrams
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)



Jared H.
5/4/2026
Ok the bearings on my wheels are 15123. I will check the rear axel, sounds like brakes on both is much better.