Length of Coleman-Mach Underbunk RV AC Power Cord

Question

Question:

How long is the power cord?

asked by: David

0

Expert Reply:

Hey David! The Coleman-Mach Underbunk RV AC # CM62RR power cord is 3' long. For a new installation, I recommend getting the # CM82RR which includes the accessory kit.

What rig are you working on?

expert reply by: Robin H

0

Coleman-Mach Underbunk RV AC
(click to enlarge)

Answer 1

Hey Ron! Great question. The Coleman-Mach Underbunk AC #CM62RR is just the main unit, so it won’t include the ducting or venting components needed to move the air. To actually route the hot air out and direct the cold air where you want it, you’ll…

view full answer...

Answer 2

Hey Leon, thanks for reaching out, and good question. No, that Coleman-Mach Underbunk RV AC #CM82RR unit really isn’t meant to live in an underbody toolbox. Even though it’s called “under-bench,” it’s still designed to operate in a properly vented…

view full answer...

Answer 3

Hello Brian, I don’t have any available to ship out, but I was able to go out to the warehouse and get the information you need. The attached photos show the exact cutout for the Coleman-Mach Underbunk RV AC All-In-One Kit w/ Heat Pump – Ducted –…

view full answer...

Answer 4

Hey Ron, great question! The Coleman-Mach Underbunk RV AC #CM82RR vents the heat through the floor. Installation requires creating openings in the floor for air flow, heat rejection, and also for the drain pipes. See the attached photo. The #CM62RR…

view full answer...

Answer 5

Hi Angela; you will run air ducting (not included) off of the openings on the side of the Coleman-Mach Underbunk RV AC #CM62RR. I recommend getting the All-In-One kit #CM82RR which includes all of the accessories you need for installation. The unit…

view full answer...

Answer 6

We are still waiting to get a set of digital install instructions for the Coleman Mach Under Bench AC units like the #CM82RR that you referenced. As soon as they are available we will have them linked on the product page but the kit does come with a…

view full answer...

Answer 7

Hello David, Thanks for reaching out. The Coleman-Mach under-bunk A/C and heat pump #CM62RR typically pulls about 8 amps during normal cooling and up to 9.8 amps at maximum load when it’s running. That translates to roughly 900–1,150 watts of…

view full answer...

Answer 8

Hi Darryl; the Velit 2000R Mini RV AC #VE49QV is designed to be installed horizontally, as in flat on the roof. Even on a roof the slope must be less than 15º. It cannot be installed vertically on a side wall. If you have limited space on the…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Length of Coleman-Mach Underbunk RV AC Power Cord

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching