What are the Dimensions of the Different Steps on the Back of Optronics Trailer GloLight STL101RFMB

Updated 07/11/2014 | Published 07/10/2014

Question:

Hi there, I might have a clearance issue when installing these lights and need a little help with dimensions. You have a great image with 4 1/2inch labeled on the back of the light at the bottom step, the step closest to the flange. I need to know the diameter and depth of the plastic step that is at the top where the electrical connector gets plugged in. Ideally, Id have dimensions diameters for all three plastic steps in the back. Can you help? Thank you very much.

asked by: Eric

Helpful Expert Reply:

I went out to the warehouse and pulled Optronics trailer light # STL101RFMB to measure it for you. That bottom tier is actually closer to 4-7/16 inches (4.44) and it is 3/16 inches tall.

The next one up is 3.95 inches in diameter, which might as well be 4 inches, and it is 3/16 inches tall.

The last tier is 3.79 inches (3-3/4) in diameter and 3/8 inches tall.

The plug at the top is 1 inch wide, 1/2 inch front to back, and 7/16 inches tall.

expert reply by: Michael H