Jack Recommendation for Thuro-Bilt Horse Trailer
Updated 07/07/2014 | Published 07/05/2014
Products Featured in This Question
Question:
On the bolt on trailer jacks triangle shape bolt on base are they all a standard size? My trailer is 7000lb GVWR . Im looking at your 5000lb bolt on side wind jack 15inch from base to top would that be the proper weight for my trailer? The jack I have now is original, bolt on triangle base and it is a Bulldog. Mine is the top wind but Im thinking the sidewind looks more weatherproof. My jack has gotten really hard to crank.
asked by: Marilyn
Expert Reply:
All A-frame mounted jacks like the Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs # TJA-5000S-B use the same 3-inch mounting hole bolt pattern. In other words, the mounting holes are a universal size and pattern so that any A-Frame jack will fit into any A-Frame jack mount. As long as your trailer has an A-Frame jack mount, this jack will fit.
The # TJA-5000S-B that you referenced would have more than enough capacity and would work very well on your Thuro-Bilt 3 horse trailer. If you need a foot plate, the #JF-99 would be a fit.
Product Page this Question was Asked From
Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- A-Frame Jacks
- Sidewind Jack
- 4001 - 5000 lbs
- Manual Jack
- 16 Inch Lift
- Bolt-On
- Weld-On
- No Wheel or Foot
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can I Install the Square A-Frame Jack w/ Footplate e74VV in a Round A-Frame Hole?
- Q&A: Does The Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers 325-GH-513 Come With The Pintle Lock?
- Q&A: Does Goodyear Endurance ST205/75R14 Radial Tire Come Balanced
- Q&A: Jack Foot For etrailer Round A-Frame Trailer Jack TJA-5000S-B
- Q&A: Sidewind A-Frame Trailer Jack that Can Have Handle Orientated on Front of Jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Does PingMaster Trailer Tracker Need To Be Hardwired Into The Trailer Wiring?
- Q&A: Trailer Jack to Avoid Tailgate Clearance Issues
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Trailer Wiring Diagrams
- Article: 5 Things to Know About Weight Distribution Hitches