Which Coil SumoSprings Do I Need for a 1" Gap in the Middle of the Coil Springs?

Question

Question:

will CSS-1094R fit a 2015 Porsche Cayenne non air suspension? I measured the gap between the center of the rear springs at a hair under a 1.

asked by: Will

0

Expert Reply:

Hey Will, thanks for the information. For a 1" gap in your coil springs, you'd want the Coil SumoSprings item # CSS-1125. These are going to be the best option to add a set to your Porsche Cayenne. They're not designed for your SUV but they're pretty universal so long as you get the correct size. They'll keep your rear end from sagging when you're towing a trailer or hauling a heavy load in the back.

What has you looking at the Coil SumoSprings?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by: Jerred H

0

CSS-1125
(click to enlarge)

Will

2/26/2026

awesome, thanks for getting back to me. We are considering them for added support when we are towing.

Jerred H.

2/26/2026

@Will You're welcome! Yeah the Coil SumoSprings item # CSS-1125 are great for towing. They'll keep your rear suspension from flexing all the way under a heavy load.

Answer 1

Hi Matt, welcome back! The Coil SumoSprings #CSS-1125F are only for the front axle on your 2022 Kia Sorento. However, that doesn't mean SuperSprings doesn't have one that will fit. If you can measure the gap between the middle of the coil on…

view full answer...

Answer 2

When it comes to using a weight distribution hitch on your aluminum trailer, the main concern isn't only the interaction of the two metals but a lot of occasions the aluminum frame isn't strong enough to be used with a steel weight…

view full answer...

Answer 3

Not all aluminum trailer frames are strong enough for use with a steel weight distribution (WD) system. It is possible that the stronger steel WD components could put too much stress on the frame. If your trailer has an aluminum frame you'll…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hi Daniel! I double checked with SuperSprings and the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension #CSS-1125F will fit the rear springs in your 2020 Kia Sorento. That said, it is going to be a fairly tight fit and you will want…

view full answer...

Answer 8

Hey Bill! The Rebel is the heavier duty SumoSprings jounce springs and they have the higher weight rating at 3,000 lbs #SS64VR or 5,000 lbs #SS27GR. I usually only recommend these heavy duty versions if you have a lot of weight in the truck bed or on…

view full answer...

Answer 9

The SuperSprings Coil Spring Inserts, #CSS-1125 and #CSS-1125R, are the same exact part and both will fit your 2011 Honda CR-V EX-L. The actual part number from SuperSprings is CSS-1125, but we put an R or an F on the end of the part numbers for…

view full answer...

Answer 10

I spoke to my source over at SumoSprings and they've had several customers who have used 2 of the Custom Helper Springs #CSS-1069 on a single spring with success. They recommend using them right next to each other as opposed to spacing them out…

view full answer...

Answer 11

So far as of June 2019 there aren't any suspension enhancement options for a 2018 Subaru Forester, but if you can get me some measurements of your rear suspension springs I can make a recommendation for correct Coil SumoSprings Custom Helper…

view full answer...

Answer 12

Hey Kevin, if you were to run the minimum 5 psi requirement in the Air Lift kit part #AL57596 the ride quality would be the same as stock as the bags would essentially be totally empty. The 5 psi prevents the bags from deforming though which is why…

view full answer...