Weight Distribution Hitch for Boat Trailer
Updated 02/20/2026 | Published 02/18/2026 >
Products Featured in This Question
Question:
Hello. I am looking for a weight distributor for a boat. The boat is 7500 lbs dry. I have a 2008 toyota tundra limited. Shortly Inam planning to get ford f150 with GVWR of 7350 lbs
asked by: David G
Expert Reply:
Hi David; you want to choose a weight distribution hitch off of the tongue weight of your trailer. The best way to do this is to measure with a scale like # BTBRV27FR or # BW34KR. If you know the weight of your trailer and boat when fully loaded, it is typically 10-15% of that weight.
Once you have this number you can figure out which system is rated appropriately for your setup. I'm also guessing you have a pole tongue, so you will need an additional adapter to make it work. I recommend going with Equal-i-zer, who is widely considered the best. You will need the Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems # EQ95-01-5950 and then you can choose from the following based on your tongue weight.
-Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37040ET (tongue weight up to 400 lbs)
-Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37060ET (TW range 200 - 600 lbs)
-Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37100ET (600 lbs - 1,000 lbs)
-Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37120ET (800 lbs - 1,200 lbs)
-Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37140ET (1,000 lbs - 1,400 lbs)
-Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ64FR (1,200 lbs - 1,600 lbs)
Based on the weight of the boat alone you'll probably need the # EQ37120ET or # EQ37140ET but you want to be sure so you aren't over/underrated.
Where are you headed first once you get your trailer set up?
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- 2-5/16 Inch Ball
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Recommended Weight Distribution System w/ Sway Control for a Trailer w/a 1,050 lbs Tongue Weight
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Why Are the Spring Bars on My Equal-i-zer Hitch Too Tight to Lift Onto the L-Brackets?
- Q&A: Is 1,200 lb Equal-i-zer Weight Distribution Hitch Good For 800+ lbs of Tongue Weight
- Q&A: Is Weight Distribution Needed for 2019 Chevy Silverado 1500 Towing 2019 Keystone Hideout 22RBWE
- Q&A: Recommended Weight Distribution Hitch Rating for 2026 Grand Design Imagine 2670MK/2800BH
- Q&A: Best Weight Distribution Recommendation for 2020 Coleman 2715rl
- Q&A: Recommended Towing Enhancements for 2019 Chevy Silverado 1500
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure for Trailer Hitch Drop
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: 7 Common Questions Everyone Has About Trailer Tires


