What Is The Distance From Sink / Counter To The Spray Spout On LC719333 Faucet?

Question

Question:

On the Lippert Flow Max kitchen faucet LC719333, what is the height from top of sink or countertop to the bottom of spray spout?

asked by: Crystal B

0

Expert Reply:

Hey Crystal!

That measurement on the # LC719333 from the counter/sink to the bottom of the spray spout where the water comes out is right at 9" (see image). Does this seem like it'll work for you? If you aren't sure, let me know and I'm happy to help.

expert reply by: Andrew N

0

LC719333 Dimensions
(click to enlarge)

Answer 1

Mattresses can vary between sub models so it's best to measure the mattress/frame that you have in order to get the correct size replacement. I would not follow the fitguide for this particular item. The Denver Mattress Supreme Euro Top RV Memory…

view full answer...

Answer 2

Hi Earl! Thanks for providing the axle information. I know you want a pre greased hub so the replacement is as straightforward as possible, especially when you're trying to avoid any surprises before your next trip. Based on your Dexter D44 axle…

view full answer...

Answer 3

Unfortunately RV faucet manufacturers don't like to offer any replacement parts so you would have to replace the entire Flow Max RV Kitchen Faucet #LC719333 instead of just simply replacing the head. If you haven't installed a faucet before…

view full answer...

Answer 4

I contacted Lippert after spending some time playing around with the Flow Max RV Kitchen Faucet LC719333 (unable to figure out how to remove it myself) and confirmed that a special aerator removal tool, sometimes referred to as a cache aerator wrench…

view full answer...

Answer 5

The SumoSprings Trailer Helper Springs part #TSS-106-40 per the instructions will be installed on the side of the axle closest to the end of the leaf spring that is connected to a shackle or center link.

view full answer...

Answer 6

The aerator for a faucet like the Flow Max RV Kitchen Faucet w/ Pull Down Spout part #LC719323 is generally located on the pull down spout (if equipped). In order to clean/repair this you simply need to un-thread the head from the spout which can…

view full answer...

Answer 7

Welcome back, Tom! The MORryde Replacement Wet Shoulder Bolt - 9/16" x 3-3/8" - Qty 1 #MR52HR will definitely work for you, but are you measuring just the threaded portion or the actual shank of the bolt? I ask as the threaded portion of…

view full answer...

Answer 8

Hey Karen, to remove a faucet like the Flow Max part #LC719333 that you referenced you'll need to unthread the nut on the bottom side of the sink that holds the faucet to the sink. If there are set crews on the nut they would need to be loosened…

view full answer...

Answer 9

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

What Is The Distance From Sink / Counter To The Spray Spout On LC719333 Faucet?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching