Are Replacement Parts Available For RV Kitchen Faucets

Question

Question:

Is a replacement bullet head available for the Lippert LC719333? If yes, where can I buy one? 2021 GD Reflection 337RLS Thanks in advance.

asked by: John C

1

Helpful Expert Reply:

Unfortunately RV faucet manufacturers don't like to offer any replacement parts so you would have to replace the entire Flow Max RV Kitchen Faucet # LC719333 instead of just simply replacing the head.

If you haven't installed a faucet before then I recommend watching the video below where I'll walk you through the installation process with a similar style faucet.

expert reply by: Kevin C

1

Answer 1

Hey Karen, to remove a faucet like the Flow Max part #LC719333 that you referenced you'll need to unthread the nut on the bottom side of the sink that holds the faucet to the sink. If there are set crews on the nut they would need to be loosened…

view full answer...

Answer 2

Many of the RV faucets we offer are constructed of a plated or coated ABS plastic. This is okay for occasional use, but it sounds like you're wanting to fill deeper, larger pots with water. One inadvertent whack when you're trying to maneuver…

view full answer...

Answer 3

Hey Willie, thanks for reaching out. I can definitely point you in the right direction. There is no way to look up your camper to know exactly what size or style of faucet it was made with, so I will ask you to confirm a bit of information here.…

view full answer...

Answer 4

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 5

Hey Mark, since we know your 2022 Imagine 2400BH trailer has 3,500 lb axles the correct bearing kit would be the part #TMK52VR. Bearing replacements are all based on the axle capacity of the trailer. Are you looking to have a spare set on hand or do…

view full answer...

Answer 6

Hey Lucas, thanks for all of the info you mentioned on your scissor jacks. Based on that the correct SnapJack set would be the part #SN32FR which is a set of 4. Now for the tongue jack the correct fitting Snap Pad for that would be the part #SN97FR.…

view full answer...

Answer 7

Hello Dennis, thanks for reaching out. Yes, the Curt Adjustable Width Trailer Hitch Receiver for RVs #13703 is definitely the best bet for adding a 2" hitch to your 2022 Grand Design 2500RL. It'll work with virtually any frame width, and the…

view full answer...

Answer 8

The Aluminum Cheetah Trailer Wheel made by Lionshead has been discontinued. I would recommend looking at the Lynx Lionshead Wheel #LHSL301. The wheel has a bolt pattern of 5 on 4-1/2 inches has a wheel bolt size of 1/2 inch by 20 and has a weight…

view full answer...

Answer 9

We have just what you need, a silver Lionshead trailer wheel and tire with part #LHSL311 which has the bolt pattern you need of 6 on 5-1/2 inch. Check out the video.

view full answer...

Answer 10

In order to retain the same suspension geometry, when you replace shackles you should use the same length replacements. Going with a shackle that is too short will not allow enough articulation in the suspension, and cause a very rough ride. Using a…

view full answer...

Answer 11

To order the correct Solera replacement arm size, simply measure the length of the wall-mount extrusion from top to bottom. I've pointed this out using the photo you sent in as an example. Short styles will measure 61-1/2" and use part…

view full answer...

Answer 12

Hey John, thanks for the picture of your truck bed! To install a set of 5th wheel rails in your 2022 Ram 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2602. This set of rails are industry standard so they'll work…

view full answer...

Are Replacement Parts Available For RV Kitchen Faucets

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching