Can the Trailer Valet Part # STC-V211 be Cranked in Either Direction  

Yes, the valve stems on the tires for the Trailer Valet #STC-V211 are easily accessible. Take a look at the picture I added pointing out the stem on one side. The trailers can be inflated to a maximum of 85 psi. Make sure the tires are at or near 85…

In regards to the Trailer Valet 5X Swivel Jack and Trailer Mover part #STC-V211, the distance from the bottom of the wheel or ground to the center of the mounting point is 11" while fully retracted.

Trailer jacks like the popular Trailer Valet #STC-V211 install on the sides of the trailer frame in the same area as the lift brackets for a weight distribution (WD) system - please see the linked photo. Since the WD system cannot be re-positioned…

In order to mount the Trailer Valet Swivel Jack and Trailer Mover, #STC-V211, on your trailer you will need at least 8 inches of free space on the tongue. I have included a picture with some measures listed. As long as you have sufficient clearance…

The Trailer Valet Swivel Jack #STC-V211 that you referenced is powered by the hand crank on the side of it. There is no electric power source that powers it. I attached a review video for this product for you to check out as well.

The Trailer Valet 5X #STC-V211 has a silver/grey powder-coat finish that in some light and on certain screens can appear darker. The appearance will vary depending on how the photography was done and on the size and type of viewing device (PC screen…

The Trailer Valet 5X replaced the V211. Our part #STC-V211 is the 5X and would be the latest version. I attached a review video for this jack for you to check out as well.

The Trailer Valet XL Trailer Dolly with Chain Drive #TVXL2 that you are looking at actually has solid rubber tires that use deep treads so you can use it on tricky surfaces like gravel, dirt, or grass. It is meant for use on pavement or well packed…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

So for your GMC Sierra 2500, I was unable to find exactly what the hitch itself was rated for; I'm seeing different numbers all over the place, but I can still answer your questions regarding a hitch extender. Any adapter/extender will reduce the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.