Lift Kit for 2018 Winnebago Micro Minnie

Updated 02/06/2026 | Published 01/10/2026

Products Featured in This Question

Torflex Lift Kit - Single Axle - 2-5/8" Lift

(797)

$155.95

Torflex Lift Kit - Tandem Axle - 2-5/8" Lift

(797)

$308.15

Question:

I have a 2018 Winnabego Micro Minnie. I am looking at lift kits. I am have having trouble with which is correct. I am wanting about 3. Which kits would fit?

asked by: Jason O

Expert Reply:

Hi Jason; your 2018 Winnebago Micro Minnie probably has Dexter Torflex axles. You need to verify this. The correct lift kit depends on which axle you have. The Torflex kits are a fixed height so unless you want to do some custom work you're stuck with whatever is available.

More than likely you have 3,500 lb axles which are the #10 Torflex. You will be able to see the capacity along with #10 or whatever other number on the axle tag. Assuming that is correct, you can use the Torflex Lift Kit - Single Axle - 2-5/8" Lift # K71-707-01 or for tandem axle # K71-707-02. If you have a different axle let me know in the comments below.

Any big trips coming up with your Micro Minnie?

expert reply by: Robin H

Torflex Lift Kit
(click to enlarge)

Ed M.

1/13/2026

I installed the lift kit on my trailer with Torflex axle and gained approximately 3 inches of lift. They were easy to install and didn't take very long. They were a great addition to my trailer that now rides fairly level behind my Jeep JKU

Brian

2/6/2026

I installed this kit on my friends R-Pod. The difference was fantastic. The R-Pod was very low to the ground and upon going over speed bumps, the rear bumper might bottom out on it. this Kit brought the unit up so dont have to worry about it anymore and it looks so better. Highly recomend it. Easy to do and install.