Is Easy Grease Trailer Idler Hub Compatible With DeeMaxx Disc Brake Kit
Updated 01/19/2026 | Published 12/24/2025
Products Featured in This Question
Question:
Hello, I have an enclosed cargo trailer with 3 of the Dexter Torflex 12 E-Z Lube axles and combined drum/rotor assemblies. I would like to switch to the DE76AR DeeMax slip-on rotor kit. Will your AKIHUB-865-7-1-EZ-K hub have long enough wheel studs for slip-on rotor and standard wheels? Do the studs stick out a full 1 9/16 inches from the hub?. Looks like I would need to get 9/16-18 lug nuts if I use these. I guess an alternative is the DE46VR DeeMax hub with races installed - not sure how much additional bearings, seals and caps would be needed with this alternative? Hope you have a Merry Christmas and I look forward to talking with you soon. Beaman.
asked by: Beaman S
Expert Reply:
Hey Beaman! You can use the Easy Grease Trailer Idler Hub with the DeeMaxx Disc Brake Kit w/ Actuator for Triple Axle Trailers # DE76AR. However, these are designed to fit 1/2" wheel bolts and the # AKIHUB-865-7-1-EZ-K uses 9/16" wheel bolts like you said so they won't be compatible.
What you need instead is the # AKIHUB-865-7-2-EZ-K which comes with the 1/2" wheel bolts. The # DE46VR you referenced also has the correct wheel bolts. The bearing kit you would need to go with the DeeMaxx hub is the # BK3-200.
I hope you had a great Christmas and if we don't hear from you in the next few days have a happy New Year!
(click to enlarge)
Product Page this Question was Asked From
DeeMaxx Disc Brake Kit w/ Actuator for Triple Axle Trailers - 13" Rotor - 8 on 6-1/2 - 7K
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Rotor
- 1/2 Inch Studs
- 7000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- DeeMaxx
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Reverse Lockout Solenoid For Dexter DX12.5 Actuator
- Q&A: DeeMax Disc Brake Kit Recommendation for 2022 Grand Design Solitude 310
- Q&A: Can Mobility Scooter Carrier be Used at Rear of Travel Trailer
- Q&A: Looking For A Replacement Actuator For My Titan 10 Surg-O-Matic
- Q&A: Replacement Bearings, Brake Pads, and Rotors for Dump Trailer With 7k Axles
- Q&A: Recommended Hitch Receiver For Jayco Travel Trailer And 4-Bike Rack Application
- Q&A: What's the Difference Between the Deutsche Hydrapro Alpha G-1600 and the DeeMaxx Alpha G1600?
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: How to Accurately Measure Trailer Leaf Springs
Robin H.
1/19/2026
Hey Beaman, how did things go pairing the DeeMaxx disc brake kit with the new hub and bearing setup? Your results could really help others working on similar triple axle trailers. Sharing what worked might guide someone else through the same upgrade.