Replacement Pitch Arm for a Solera 2000 Series RV Awnings PN V000572047
Updated 11/23/2025 | Published 11/12/2025
Products Featured in This Question
Question:
The pitch arm on one side of my campers awning broke. Can the pitch arm be replaced or must the entire support arm be replaced. A sticker on my awning has the number V000572047. It is a Lippert component. Please direct me to the part that I will need. Thank you.
asked by: Bruce M
Expert Reply:
Hey Bruce, thanks for the information. Sorry to hear you broke your pitch arm, however we do have it as a replacement so you won't have to purchase the entire support arm. You'll need the Replacement Pitch Arm Assembly for Lippert Solera 2000 Series RV Awnings item # LC93BX. You'll also need 3 of the Retaining Washer item # LC431583 for the installation. You can reuse your old ones, but just wanted to throw this in here in case those got damaged too.
How did you break your pitch arm?
You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
(click to enlarge)
Product Page this Question was Asked From
Replacement Pitch Arm Assembly for Solera 2000 Series RV Awnings - Black - Qty 1
- Accessories and Parts
- RV Awnings
- Arms
- Support Arms
- Solera Replacement
- Pitched Awnings
- Black
- Lippert
more information >
Continue Researching
- Search Results: v000572047
- Shop: Replacement Pitch Arm Assembly for Solera 2000 Series RV Awnings - Black - Qty 1
- Shop: Replacement Retaining Washer for Solera RV Awning Pitch Arm - Qty 1
- Shop: Replacement Idler Arm Assembly for Lippert Edge RV Awnings with LEDs - 58" Long - Black
- Shop: Replacement Drive Arm Assembly for Lippert Edge RV Awnings with LEDs - 58" Long - Black
- Shop: Solera Awnbrella Support Kit for 14' to 18' Wide RV Awnings w/ 8' Projections
- Shop: Replacement Support Arm Assembly for Solera Flat RV Awnings - 69" Long - Black - Qty 1
- Video: Replacement Retaining Washer for Solera RV Awning Pitch Arm Feature Review
- Video: Review of Lippert RV Awnings - Replacement Pitch Arm Assembly - LC93BX
- Shop: Replacement Pitch Arm for Solera Flat RV Awnings w/ 69" Long Support Arms - Black - Qty 1
- Q&A: Replacing Star Lock Retaining Washer
- Search Results: solera 3000 awning
- Search Results: solera 3000
- Search Results: rv awnings
- Search Results: awning hardware
- Search Results: solera awning hardware
- Q&A: How to Remove and Reinstall New Pin Solera Pin LC93FR
- Q&A: How To Replace Bent Shaft On Solera Power Awning Head
- Video: Ultimate Overview of the Replacement Drive Head Retaining Clip for Solera Power RV Awnings
- Video: All About the Replacement Drive Head Pin for Solera Power RV Awnings
- Video: Replacement Drive Head Pin for Solera Power RV Awnings: The Breakdown
- Video: Review of Lippert Replacement Pin Solera RV Awning - LC25BX
- Q&A: Overall Length of Replacement Pitch Arm Assembly # LC93BX
- Q&A: Replacement 58 inch Arm for Solera Edge RV Awning
- Q&A: Correct Replacement 58" Awning Arms for a 2021 Forest River Cherokee Wolf Pack
- Q&A: Parts Needed to Flat Tow 2026 Chevrolet Trax
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Performance Chips and Modules
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: Converting Your RV Water Heater to Tankless
on Accessories and Parts
T
11/23/2025
Jared, The bottom of the arm rusted and it just broke under pressure. Not really that old.