Reverse Lockout for the Demco Hydraulic Brake Actuator DM8759802
Updated 12/01/2025 | Published 11/08/2025
Products Featured in This Question
Question:
On the Dm875902 what reverse lockout do you recommend
asked by: James M
Expert Reply:
Hey James. For the Demco Hydraulic Brake Actuator item # DM8759802, I recommend the Reverse Lockout Solenoid Kit for Demco Hydraulic Brake Actuators item # DM5837. This installs in-line at the back of the actuator. It comes with a protective shield that will bolt right to the top of the actuator.
What kind of trailer do you have?
You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
(click to enlarge)
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator - Drum - Primed - A-Frame - 2-5/16" Bulldog Coupler - 8,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Travel Trailer
- Utility Trailer
- Weld-On
- 8000 lbs GTW
- 2-5/16 Inch Ball Coupler
- A-Frame Tongue
- Drum Brakes
- No Lockout
- Demco
more information >
Continue Researching
- Q&A: Brakes Still Lock Up with Manual Reverse Lockout Kit for Demco Hydraulic Trailer Brake Actuators
- Q&A: How to Find Correct Replacement Hydraulic Surge Brake Actuator for Trailer
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Q&A: How to Convert a Trailer with Surge Brakes to Electric Over Hydraulic Brakes
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Q&A: Determining Correct Bolt Pattern and Tire Size for Replacement Tires and Wheels on Jayco Camper
- Q&A: How Much Slack Is Needed In Trailer Wire Connection To The Tow Vehicle?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Determine Tire/Wheel Diameter
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
Jerred H.
12/1/2025
Hey James, how did the reverse lockout solenoid kit work with your Demco hydraulic brake actuator? Your update could make it easier for the next person setting up the same combo.