Recommended Slide-Out Awnings/Toppers for RV Slide Outs

Published 11/06/2025

Products Featured in This Question

Solera RV Slide-Out Awning - 79" Wide - Black

(1438)

$397.56

Solera RV Slide-Out Awning - 85" Wide - Black

(1438)

$464.34

Solera RV Slide-Out Awning - 145" Wide - Black

(1438)

$719.39

Question:

Hello, I want to purchase three slide toppers. Flange to flange are, 143.5 inches, 83.5 inches and 73.5 inches. Black. Thank you

asked by: Kevin

Expert Reply:

Hey Kevin, thanks for the information! I've listed the slide toppers you need below:

73-1/2" - Solera RV Slide-Out Awning - 79" Wide - Black item # LCV000168105

83-1/2" - Solera RV Slide-Out Awning - 85" Wide - Black item # LCV000165062

143-1/2" - Solera RV Slide-Out Awning - 145" Wide - Black item # LCV000177334

Please note that you are going to need at least 7" of clearance on both sides of the slide-out for the mounting brackets. If you don't have this additional space on the side of your RV we'll need to go down to a smaller slide-out awning.

How much space do you have around your slideouts and what kind of motorhome or trailer do you have?

You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.

expert reply by: Jerred H

Slideout Awning Bracket
(click to enlarge)

Slide-Out Awning
(click to enlarge)

Kevin

11/6/2025

Its a 2022 Keystone Raptor 423. I'll measure it when i get back to it. Thank you

Jerred H.

11/6/2025

@Kevin You're welcome! That's real nice setup. Judging by the pics online it looks like you're going to have some spacing issues on the passenger side if you have those two large awnings on both sides of the door. When you remeasure, I recommend accounting for the 7" on either side of the slideouts you need for the brackets. You can mount the topper directly above the slide outs if you don't have clearance but the topper will not cover the entire width of the slideout.

Kevin

11/6/2025

Yes, i see that. I pulled up a picture. If i wanted to install right on top of the slide out, what part# would that one be?