Best Single Bike Rack For Carrying A Electra Townie Go! Electric Bike

Question

Question:

I just purchased an electra townie go s electric bike. 60 pounds with fenders. Is this rack a good option or would you suggest something else.

asked by: Dave S

0

Expert Reply:

Hi Dave!

From the pictures I found of your Electra Townie Go! electric bike, I don't think the Hollywood Racks CrossTrack Bike Rack for 1 Bike - 2" Hitches - Wheel Mount # HLY98RR is going to work. The fender on your front wheel is most likely fine, but the fender on your back tire will not allow for it to fit properly, unfortunately.

I think the Benton LittleShift Bike Rack for 1 Bike - 2" Hitches - Wheel or Frame Mount # B54VR will be a better option. You can mount the hook forward of your front fender or to the frame to secure your bike, so it is a little more versatile. I included an image of what I mean by mounting the hook forward of your fender as well.

What vehicle will you be mounting this rack in?

expert reply by: Lazer S

0

Benton Little Shift B54VR
(click to enlarge)

Dave S.

10/3/2025

Ford F-150

Lazer S.

10/7/2025

@DaveS Nice. Your truck will have no issue carrying this rack and the included anti-rattle pin will keep it from flopping around while doing so. Let me know if there is anything else I can help with! : )

Answer 1

Hello Kris, Great question! The step is actually my favorite added feature on the Benton LittleShift Bike Rack #B54VR. It does have a nice textured coating making it slip resistant, it would work great to get something off the roof of you car, or you…

view full answer...

Answer 2

Your Electra Townie step-through-frame bikes pose a challenge to finding a suitable hitch-mount carrier since the bikes lack both a top frame tube and since they have fenders. These features make most carriers unsuitable since most use either the top…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hey Chris! The Hollywood Racks CrossTrack Bike Rack part #HLY98RR already comes with a hitch lock so no need to get one separately! There is also an integrated cable lock to wrap around your bikes as well. The CrossTrack is expandable so that you can…

view full answer...

Best Single Bike Rack For Carrying A Electra Townie Go! Electric Bike

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching