Looking For Bearing Kit For 6x12 Enclosed V-Nose Trailer
Updated 09/29/2025 | Published 09/09/2025
Products Featured in This Question
Question:
Hello. I have a 6x12 enclosed V nose trailer double axle ez lube. I need the part number for the bearing replacement kit. Thank you.
asked by: William W
Expert Reply:
Hello William, thanks for reaching out. We should have the bearing kit you need, but there is no way to look up your trailer using the information provided to find out exactly what bearings you need.
The best way to find that out will be for you to provide the casting number from your hubs. Brake drums will have a number cast on the front, while idler hubs will have a number cast on the back. In most cases we can use this number to find out what bearings you need.
You most likely have two 3,500 lb axles, which would use the bearing kit # BK2-100, but please confirm this is what you have.
Get me that number when you get a chance and I am happy to look into it.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Suspension Enhancement Recommendation for Trailer with Dexter 2,000 lb Axles
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Can I Add Electric Brakes To A 1993 EZ Loader Boat Trailer
Jesse M.
9/29/2025
Hey William, did you have a chance to find the casting number on your hubs? I'm happy to look into it further for you.