Flat Tow Wiring For A 2025 Ford F250 Platinum With LED Tail Lights

Question

Question:

Hello, I have a 2025 F250 Platinum with full LED tail lights. I will be flat towing my F250 behind my motorhome. I need to know which light wiring kits would be compatible with my truck.

asked by: Jonathan T

1

Helpful Expert Reply:

Hi Jonathan!

The best flat tow wiring kit for your 2025 Ford F250 Platinum with LED taillights will be the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord # RM-15267. This will work with the LED lights and has all the ports needed to set up the braking system as well, though you will also need the Roadmaster Brake-Lite Relay Kit for Towed Vehicles # RM-88400 to keep your F250's brake signal from overriding the turn signal sent by your RV.

Do you already have the braking system and the rest of the flat towing components?

expert reply by: Lazer S

1

Jonathan T.

9/11/2025

I don't have the braking system, but I am thinking I will go with the AirForce One Braking System. One other thing, can you look at the baseplates I would need? My 2025 F250 Platinum, is a tremor. I wanted the Roadmaster plates, but it seems those won't work. What would be the next best option (would prefer it be the kind that can be taken in and out like the Roadmaster one, so it's not as visible when not in use). Thoughts? Do I need the cable that will charge the battery on the F250 as well?

Reply

Lazer S.

9/12/2025

@JonathanT Your battery will drain while being flat towed, so you will want a charge line. For the towed side you will want the # RM-156-25, and for the RV side you will want the # RM-156-75 (if that port on your 7-way isn't active). The Demco Air Force One Flat Tow Brake System for RVs w/ Air Brakes - Wireless Monitoring # DM26VR is one of my favorites and I almost always recommend it, so I think it's a very good choice. Just be aware you will need the Roadmaster Brake-Lite Relay Kit for Towed Vehicles # RM-88400 to keep your truck's brake signal from overriding the turn signal sent by your RV. Having the Tremor package does make the base plate a bit more difficult, but not the end of the world or anything. The only option with removeable arms is the Curt Custom Base Plate Kit # C56JR. This will work with Curt and Blue Ox tow bars though, so it is still a good option. As you were looking at the Roadmaster base plate, can I assume you have a Roadmaster tow bar? If so, which one?

Reply

Jonathan T.

9/12/2025

@LazerS I actually have the NSA tow bars currently. My previous truck had Blue ox plates.

Reply

Lazer S.

9/16/2025

@JonathanT If the NSA tow bars you currently have were being used with the Blue Ox base plate on your previous truck, the Curt Custom Base Plate Kit # C56JR will work perfectly fine. If you wanted to check out a fixed arm Blue Ox option though, that would be the Blue Ox Base Plate Kit - Fixed Arms # BLU37UR. I don't think it would be super noticeable after being installed, but we haven't done an install with it as of yet so I can't say that for sure.

Reply

Answer 1

Happy to help, Kevin! When looking at parts needed for flat towing it's mostly about the vehicle you are flat towing and not so much the year, make, and model of the RV you're driving. The only thing we need to know about the RV is the type…

view full answer...

Answer 2

The 6-way side of the cable included in the Hopkins Tow Bar Extension Cord #HM47057 is wired with 12V power on the center pin. This plug can be re-configured if desired by disassembling it and re-pinning it. I confirmed this with my contact at…

view full answer...

Answer 3

Hey Steve, thanks for reaching out! The Roadmaster Direct-Connect Base Plate Kit #RM87NQ fits your 2025 Ford Maverick as long as it's the Hybrid model that doesn't have the engine block heater. It doesn't come with the 6-Pin connector,…

view full answer...

Answer 4

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 5

Hi Mark, I totally get how frustrating that must be especially after choosing the Maverick for flat towing. I did find some updated info I can share with you, but the best way to stay on top of things for your specific vehicle is to use Ford’s…

view full answer...

Answer 6

Hey Shawn! You can definitely mix and match manufacturer's when setting up a flat tow. The one major thing you really have to pay attention to is the compatibility of the tow bars with the baseplates. You can mix up brands but they have to have…

view full answer...

Answer 7

Hey Christian, welcome to the world of RV-ing! So in addition to the Roadmaster Nighthawk #RM-676 you're also goin to need: - A baseplate kit, like the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These attach to the Jeep itself so you…

view full answer...

Answer 8

Hey Peter, congrats on the new Maverick! Here are the best parts to flat tow your 2025 Ford Maverick Hybrid: Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates item #e74ZR Baseplate Kit - Roadmaster…

view full answer...

Answer 9

Hi Kirk! To get a braking system working on your 2026 Buick Encore GX, you will need to start with something like the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord #RM-15267, if you do not already…

view full answer...

Flat Tow Wiring For A 2025 Ford F250 Platinum With LED Tail Lights

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching