What is the Recommend Toque Specifications for a 1/2" Stud?
Updated 09/13/2025 | Published 08/28/2025
Question:
What would you recommend for the lug nut torque value when installing the tire?
asked by: Preston R
0
Expert Reply:
Hello Preston,
When installing the tires on the Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs # e84YR, since they have 1/2" studs, you will want to toque them to 75-85 ft lbs.
Are you swapping an axle out, or building a trailer?
expert reply by:
Kate F
0
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Article: How to Measure a Trailer Axle
- Q&A: Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
- Q&A: What Replacement Converter Do I Need for a Series 7300 Model 7345 Converter?
- Q&A: What is the Total Length of the Trailer Axle with Idler Hubs With a 60" Hub Face
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Comparing etrailer Tailer Axle # e84YR To Dexter 6047 2,000LB Trailer Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: Availability Of Replacement Axle For 1,720 lb Harbor Freight Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Lighting Requirements
Kate F.
9/12/2025
Hey Preston, did you find the torque values helpful for your tire installation? I'm curious if you're swapping an axle or building a trailer, as it could help me assist others in similar situations.